ISL9012IRMMZ-T

Description：IC REG LIN 3/3V 150/300MA 10DFN
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:9f0912366ec1 Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

ISL9012IRMMZ-T is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC REG LIN 3/3V 150/300MA 10DFN. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for ISL9012IRMMZ-T

Description：IC REG LIN 3/3V 150/300MA 10DFN
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR),Cut Tape (CT)
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：2
Voltage - Input (Max)：6.5V
Voltage - Output (Min/Fixed)：3V, 3V
Voltage - Output (Max)：-
Voltage Dropout (Max)：0.2V @ 150mA, 0.325V @ 300mA
Current - Output：150mA, 300mA
Current - Quiescent (Iq)：40 µA
Current - Supply (Max)：60 µA
PSRR：-
Control Features：Enable
Protection Features：Over Current, Over Temperature, Soft Start, Under Voltage Lockout (UVLO)
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：10-VFDFN Exposed Pad
Supplier Device Package：10-DFN (3x3)
Grade：-
Qualification：-

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for ISL9012IRMMZ-T

ISL9012IRMMZ-T

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The ISL9012IRMMZ-T is a dual low-dropout linear regulator manufactured by Renesas Electronics Corporation, housed in a 10-lead 3x3mm DFN package. It provides two fixed positive output voltages: VO1 at 3.0V with a maximum continuous current of 150mA, and VO2 at 3.0V with a maximum continuous current of 300mA. The device operates within an input voltage range of 2.3V to 6.5V and features a typical quiescent current of 45µA when both LDOs are active. It includes integrated Power-On Reset (POR) functionality for the VO2 channel, adjustable via an external capacitor on the CPOR pin.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

Integrates two independent high-performance LDO channels with separate enable pins for individual power control.
Features a programmable Power-On Reset (POR) circuit for the second output channel to indicate valid voltage levels.
Provides excellent transient response and load regulation across full load current ranges.
Includes soft-start capability to limit input current surge during enable and thermal shutdown protection.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Portable instruments and handheld devices
Cell phones and smart phones
Medical handheld equipment

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels. Confirm RoHS compliance status and check for specific manufacturing lot codes against official datasheets. Ensure proper ESD handling procedures are followed during storage and installation to maintain device reliability.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component for applications requiring dual fixed voltage rails from a single supply source. Verify that the required output currents do not exceed 150mA for Channel 1 and 300mA for Channel 2. Ensure the input voltage remains within the 2.3V to 6.5V operational range and that output capacitors fall between 1µF and 10µF for stability.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This part belongs to the ISL9012 series of dual LDO regulators designed for low noise and low standby current consumption. It is pin-compatible with certain Micrel MIC2212 variants. The device utilizes a 10-lead 3x3mm DFN package suitable for space-constrained portable electronics and mobile computing applications.