LM2904AVQPWRG4Q1

$0.52

Description：IC OPAMP GP 2 CIRCUIT 8TSSOP
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:d36fce61b845 Category: Instrumentation, Op Amps, Buffer Amps Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LM2904AVQPWRG4Q1 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC OPAMP GP 2 CIRCUIT 8TSSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LM2904AVQPWRG4Q1

Description：IC OPAMP GP 2 CIRCUIT 8TSSOP
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR),Cut Tape (CT)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：-
Slew Rate：0.3V/µs
Gain Bandwidth Product：700 kHz
Current - Input Bias：20 nA
Voltage - Input Offset：1 mV
Current - Supply：500µA (x2 Channels)
Current - Output / Channel：30 mA
Voltage - Supply Span (Min)：3 V
Voltage - Supply Span (Max)：26 V
Operating Temperature：-40°C ~ 125°C (TA)
Grade：Automotive
Qualification：AEC-Q100
Mounting Type：Surface Mount
Package / Case：8-TSSOP (0.173", 4.40mm Width)
Supplier Device Package：8-TSSOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LM2904AVQPWRG4Q1

LM2904AVQPWRG4Q1

Instrumentation, Op Amps, Buffer Amps Overview

The LM2904AVQPWRG4Q1 is a dual operational amplifier from Texas Instruments, designed for automotive applications with AEC-Q100 qualification. It features a gain-bandwidth product of 700 kHz and a slew rate of 300 mV/us. The input offset voltage is 7 mV, with an input bias current of 250 nA. Operating on a single supply from 3 V to 26 V or dual supplies up to ±13 V, it draws 350 uA of quiescent current per channel. The output can source 20 mA, offering a common-mode rejection ratio of 80 dB and an input voltage noise density of 40 nV/sqrt Hz. It operates within a temperature range of -40°C to +125°C in an 8-TSSOP package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Automotive-grade reliability certified under AEC-Q100 standards for extended temperature operation.
Rail-to-rail output capability allows signal swing close to the power supply rails.
High open-loop gain suitable for precision analog signal conditioning tasks.

Instrumentation, Op Amps, Buffer Amps Applications

Automotive sensor signal conditioning
Active filter circuits in vehicle electronics
General-purpose amplification in harsh environments

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'AVQPWRG4Q1' against the official datasheet to ensure correct automotive grade, temperature range, and package type. Confirm RoHS compliance status as indicated in the manufacturer's documentation. Check for any recent PCN notices regarding assembly location or material changes before finalizing procurement orders.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when automotive qualification and wide operating temperature are required. Compare input offset voltage and bias current specifications against other LM2904 variants if higher precision is needed. Ensure the TSSOP-8 footprint matches the PCB layout constraints and thermal management requirements of the target design.

Instrumentation, Op Amps, Buffer Amps Part Context

This device belongs to the LM2904-Q1 family of dual operational amplifiers. It shares functional similarities with the LM2904VQPWRG4Q1 but may differ in specific electrical parameters such as input offset voltage or bias current. The 'A' designation typically indicates tighter performance tolerances compared to standard versions within the same series.