LT6203CS8#PBF

$7.78

Description：IC OPAMP GP 2 CIRCUIT 8SO
Series：LT®
Mfr：Analog Devices Inc.
Package：Tube

SKU:5b0c13927718 Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LT6203CS8#PBF is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC OPAMP GP 2 CIRCUIT 8SO. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LT6203CS8#PBF

Description：IC OPAMP GP 2 CIRCUIT 8SO
Series：LT®
Mfr：Analog Devices Inc.
Package：Tube
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：25V/µs
Gain Bandwidth Product：100 MHz
Current - Input Bias：3.8 µA
Voltage - Input Offset：2.6 mV
Current - Supply：2.8mA (x2 Channels)
Current - Output / Channel：40 mA
Voltage - Supply Span (Min)：2.5 V
Voltage - Supply Span (Max)：12.6 V
Operating Temperature：0°C ~ 70°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SO

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LT6203CS8#PBF

LT6203CS8#PBF

Instrumentation, Op Amps, Buffer Amps Overview

The LT6203CS8#PBF is a dual-channel, unity-gain stable operational amplifier featuring rail-to-rail input and output capabilities. It delivers a gain bandwidth product of 100MHz and a slew rate of 25V/µs with an ultralow noise voltage density of 1.9nV/√Hz at 100kHz. The device operates on supply voltages ranging from 2.5V to 12.6V, drawing a typical supply current of 2.8mA per amplifier. Packaged in an 8-lead plastic SOIC, it supports an operating temperature range of 0°C to 70°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Rail-to-rail input and output operation across the full supply voltage range
Ultralow noise voltage density of 1.9nV/√Hz combined with low power consumption
Unity gain stability with high gain bandwidth product for signal conditioning

Instrumentation, Op Amps, Buffer Amps Applications

Low noise, low power signal processing
Active filters
Driving A/D converters
DSL receivers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify that the component matches the specific C grade temperature rating (0°C to 70°C) required for the application environment. Confirm the 8-lead SOIC package dimensions align with the PCB footprint design. Ensure the datasheet specifications are referenced for final electrical validation before integration into the circuit design.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this part when both rail-to-rail I/O performance and ultralow noise are critical requirements. The dual configuration offers space efficiency compared to single-channel alternatives. Consider the 0°C to 70°C commercial temperature range limits against environmental conditions. Evaluate the 100MHz bandwidth against the highest frequency signals present in the system.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the LT6202/LT6203/LT6204 family of low noise, rail-to-rail input and output unity gain stable op amps. The LT6203 specifically provides two amplifiers in one package, whereas the LT6202 is single-channel and the LT6204 is quad-channel. All variants share the same core electrical characteristics regarding noise and speed.