MAX339CSE

Description：IC SWITCH SP4T X 2 400OHM 16SOIC
Series：-

SKU:b45053f327d1 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX339CSE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SP4T X 2 400OHM 16SOIC. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX339CSE

Description：IC SWITCH SP4T X 2 400OHM 16SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SP4T
Multiplexer/Demultiplexer Circuit：4:01
On-State Resistance (Max)：400Ohm
Channel-to-Channel Matching (ΔRon)：4Ohm
Voltage - Supply, Single (V+)：4.5V ~ 30V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：500ns, 500ns
-3db Bandwidth：-
Charge Injection：1.5pC
Channel Capacitance (CS(off), CD(off))：3pF, 6pF
Current - Leakage (IS(off)) (Max)：20pA
Crosstalk：-92dB @ 100kHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Surface Mount
Package / Case：16-SOIC (0.154", 3.90mm Width)
Supplier Device Package：16-SOIC
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX339CSE

MAX339CSE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX339CSE is a dual 4-channel CMOS analog multiplexer in a 16-pin Narrow SO package. It connects one of four inputs to a common output via a 2-bit binary address. The device operates from single +4.5V to +30V or dual ±4.5V to ±20V supplies. Key electrical parameters include a maximum on-resistance of 400 Ω, off-leakage current less than 20nA at +25°C, and typical charge injection of 1.5pC. Control inputs are TTL compatible (+0.8V to +2.4V). The component provides electrostatic discharge protection exceeding 2000V per method 3015.7 and functions as both a multiplexer and demultiplexer.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Dual 4-channel architecture with bidirectional signal conduction
TTL-compatible control logic for simplified interfacing
Low leakage characteristics with guaranteed low charge injection
High electrostatic discharge protection rating

Analog Switches, Multiplexers, Demultiplexers Applications

Data-acquisition systems
Sample-and-hold circuits
Test equipment
Military radios
Guidance and control systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'CSE' corresponds to the commercial temperature range (0°C to +70°C) and the 16-pin Narrow SOIC package configuration. Confirm that the ordering part number matches the exact pinout and voltage specifications required for the target application circuit design.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a dual 4-channel analog switch is required with TTL-compatible addressing. Ensure the supply voltage range aligns with the system's power rails. Consider the 400 Ω on-resistance limit and the 20nA leakage specification against the signal integrity requirements of the connected analog paths.

Analog Switches, Multiplexers, Demultiplexers Part Context

This device belongs to the MAX338/MAX339 family of monolithic CMOS analog multiplexers. It serves as a pin-compatible upgrade for industry-standard DG508A and DG509A devices. The MAX339 specifically offers dual 4-channel functionality, contrasting with the MAX338's single 8-channel configuration within the same series.