MAX4075BNEUA

$0.92

Description：IC OPAMP GP 2 CIRCUIT 8UMAX
Series：GainAmp™
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube

SKU:eb714fc41704 Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4075BNEUA is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC OPAMP GP 2 CIRCUIT 8UMAX. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for MAX4075BNEUA

Description：IC OPAMP GP 2 CIRCUIT 8UMAX
Series：GainAmp™
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：0.1V/µs
Gain Bandwidth Product：4 MHz
Current - Input Bias：0.8 pA
Voltage - Input Offset：200 µV
Current - Supply：37µA (x2 Channels)
Current - Output / Channel：22 mA
Voltage - Supply Span (Min)：2.5 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 70°C
Mounting Type：Surface Mount
Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package：8-uMAX-EP , 8-uSOP-EP
-3db Bandwidth：40 kHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for MAX4075BNEUA

MAX4075BNEUA

Instrumentation, Op Amps, Buffer Amps Overview

The MAX4075BNEUA is a dual-channel micropower fixed-gain operational amplifier from the GainAmp family. It operates on a single +2.5V to +5.5V supply with a typical supply current of 37µA per channel. The device features factory-trimmed internal gain-setting resistors providing 0.1% gain accuracy and high-voltage fault protection capable of withstanding ±17V at either input without damage. It offers rail-to-rail output swing, driving a 1kΩ load while maintaining excellent DC accuracy.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Integrates precision laser-trimmed internal gain-setting resistors for fixed inverting or noninverting configurations
Includes high-voltage fault protection allowing inputs to withstand ±17V relative to VEE
Features rail-to-rail outputs that drive a 1kΩ load while maintaining excellent DC accuracy

Instrumentation, Op Amps, Buffer Amps Applications

Portable battery-powered equipment
Instruments, terminals, and bar-code readers
Photodiode preamps
Low-side current-sense amplifiers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific gain code suffix required for the desired voltage gain configuration, as the base part number requires this addition. Confirm package availability matches the USOP-8 variant. Check current lifecycle status as distribution may be limited or discontinued depending on the region.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when space-constrained designs require fixed-gain amplification without external feedback resistors. It is suitable for applications needing high-voltage tolerance at the input pins. Ensure the required gain value corresponds to one of the available standard codes within the GainAmp family specifications.

Instrumentation, Op Amps, Buffer Amps Part Context

This device belongs to the Maxim Integrated GainAmp family, which combines low-cost rail-to-rail op amps with precision internal gain-setting resistors. The MAX4075 specifically provides a dual-channel version of the fixed-gain architecture, offering an alternative to open-loop unity-gain-stable variants like the MAX4076/77/78.