MAX4304ESA

$2.23

Description：IC VOLTAGE FEEDBACK 1 CIRC 8SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube

SKU:b358819544ca Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4304ESA is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC VOLTAGE FEEDBACK 1 CIRC 8SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for MAX4304ESA

Description：IC VOLTAGE FEEDBACK 1 CIRC 8SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Amplifier Type：Voltage Feedback
Number of Circuits：1
Output Type：-
Slew Rate：1000V/µs
Gain Bandwidth Product：-
Current - Input Bias：32 µA
Voltage - Input Offset：1 mV
Current - Supply：20mA
Current - Output / Channel：70 mA
Voltage - Supply Span (Min)：7 V
Voltage - Supply Span (Max)：11 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：740 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for MAX4304ESA

MAX4304ESA

Instrumentation, Op Amps, Buffer Amps Overview

The MAX4304ESA is a single-channel, voltage-feedback operational amplifier manufactured by Analog Devices Inc./Maxim Integrated. It operates on dual power supplies ranging from ±3.5V to ±5.5V with a quiescent supply current of 20mA. The device delivers a -3dB bandwidth of 740MHz and a slew rate of 1000V/µs at a closed-loop gain of +2V/V. Key electrical parameters include an input voltage noise density of 2.1nV/√Hz, an input offset voltage of 1mV, and an output current drive capability of ±70mA. It features a spurious-free dynamic range of -88dBc at 5MHz with a 100Ω load.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Ultra-high speed performance optimized for gains of +2V/V or greater
Low noise characteristics with minimal differential gain and phase error
High output current drive capability for demanding loads

Instrumentation, Op Amps, Buffer Amps Applications

Video ADC preamplifiers
Pulse and RF telecommunications applications
Video buffers and cable drivers
Ultrasound systems
Active filters

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific package variant against design requirements, as the component is available in both 8-pin SO and 5-pin SOT23-5 configurations. Confirm that the minimum stable gain requirement of +2V/V aligns with the circuit topology. Ensure board layout adheres to high-frequency bypassing guidelines to maintain specified AC performance.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high bandwidth and low distortion are critical for video or telecommunication signal processing. The fixed compensation for a minimum gain of +2V/V distinguishes it from unity-gain stable variants within the same family. Evaluate thermal dissipation limits if operating near maximum supply voltages or ambient temperatures.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the MAX4104/MAX4105/MAX4304/MAX4305 series of ultra-high-speed, low-noise amplifiers. Unlike the MAX4104 which is unity-gain stable, the MAX4304 is compensated for higher closed-loop gains to achieve superior bandwidth and slew rate specifications. The family shares common low-noise architecture and packaging options.