MBR2540CT_T0_00001

Diode Arrays Overview

The MBR2540CT_T0_00001 is a Schottky Barrier Rectifier from the MBR2540CT Series manufactured by Panjit International Inc. It features a TO-220AB molded plastic case with solder-plated terminals. The device provides a maximum average forward current of 25 A and a maximum repetitive peak reverse voltage of 40 V. Electrical characteristics include a maximum forward voltage of 0.7 V at 12.5 A per leg, a peak forward surge current of 200 A, and a typical thermal resistance of 2 °C/W. Operating junction and storage temperatures range from -65 to +175 °C.

Diode Arrays Feature Summary

• Utilizes metal silicon junction technology for majority carrier conduction, resulting in low power loss and high efficiency.
• Constructed with a flame retardant epoxy molding compound that meets Underwriters Laboratory Flammability Classification 94V-O.
• Designed for high surge capacity and high current capability suitable for demanding rectification applications.

Diode Arrays Applications

• Low voltage, high frequency inverters
• Free wheeling circuits
• Polarity protection

Diode Arrays Procurement Notes

Verify the specific ordering suffix _T0_00001 against official documentation to confirm packing type and environmental compliance status. The datasheet indicates this code corresponds to Tape and Reel packaging on a 13-inch reel with RoHS compliance. Confirm mechanical dimensions and terminal solderability requirements against MIL-STD-750 standards prior to integration.

Diode Arrays Selection Notes

Select this component for applications requiring a 25 A continuous current rating and a 40 V blocking voltage. Ensure the thermal management design accommodates the 2 °C/W junction-to-case thermal resistance. Verify that the operating environment stays within the specified temperature range of -65 to +175 °C. Consider derating factors for capacitive loads as specified in the electrical characteristics.

Diode Arrays Part Context

This part belongs to the MBR2540CT Series of Schottky Barrier Rectifiers offered by Panjit International Inc. The series covers voltage ratings from 40 to 200 Volts with a consistent 25 Ampere current capability. The MBR2540CT variant specifically addresses the 40 Volt requirement within this lineup, sharing common mechanical and thermal characteristics with other series members.

Diode Arrays Replacement Considerations

Cross-reference with MBR2545CT or MBR2550CT if higher voltage ratings are acceptable. Verify pinout compatibility and thermal resistance specifications when substituting with components from other manufacturers.

Diode Arrays FAQ

What is the maximum forward voltage drop for the MBR2540CT?

The maximum forward voltage is 0.7 V measured at 12.5 A per leg.

Does the MBR2540CT support lead-free manufacturing standards?

Yes, the device is lead-free and complies with the EU RoHS 2011/65/EU directive.

What is the peak non-repetitive surge current rating?

The peak forward surge current is 200 A for an 8.3 ms single half sine-wave superimposed on rated load.