MCP37D11T-200I/TL

Analog To Digital Converters (ADC) Overview

The MCP37D11T-200I/TL is a 12-bit, 200 Msps pipelined analog-to-digital converter featuring an 8-channel input multiplexer and digital down-conversion. It delivers a typical SNR of 71.3 dBFS and SFDR of 90 dBc at 200 Msps with LVDS outputs. Power dissipation is 468 mW at full speed, reducing to 28 mW in shutdown mode. The device supports dual supply voltages (1.2V or 1.8V) for both analog and digital sections. It includes built-in calibration algorithms such as harmonic distortion correction and DAC noise cancellation. The component is housed in a VTLA-124 package operating from -40°C to +85°C.

Analog To Digital Converters (ADC) Feature Summary

• 200 Msps sampling rate with 12-bit resolution and 8-channel differential input MUX
• Digital Down-Conversion (DDC) with I/Q output capability
• Built-in Digital Signal Post-Processing including decimation filters and fractional delay recovery
• Low power consumption: 468 mW (LVDS), 144 mW standby, 28 mW shutdown

Analog To Digital Converters (ADC) Applications

• Cellular base stations
• Lidar and radar systems
• Ultrasound and sonar imaging
• Microwave digital radio

Analog To Digital Converters (ADC) Procurement Notes

Verify the specific suffix 'TL' against official documentation to confirm the VTLA-124 package and industrial temperature range (-40°C to +85°C). Ensure compatibility with the required digital interface (CMOS or DDR LVDS) and supply voltage levels (1.2V or 1.8V) for the target design.

Analog To Digital Converters (ADC) Selection Notes

Select this model when digital down-conversion and multi-channel synchronization are required. Compare with the MCP37211-200 if DDC is unnecessary. Consider the TFBGA-121 variant if automotive qualification (AEC-Q100) and extended temperature range (+125°C) are needed instead of the standard industrial grade.

Analog To Digital Converters (ADC) Part Context

This part belongs to the MCP37D11-200 family, which integrates digital signal post-processing features not found in the baseline MCP37211-200. The 'T' indicates tape and reel packaging, while 'I' denotes the industrial temperature range. The 'TL' suffix specifies the VTLA-124 package option.

Analog To Digital Converters (ADC) Replacement Considerations

The MCP37211-200 is pin-compatible but lacks Digital Down-Conversion. For automotive applications requiring extended temperature ranges, the TFBGA-121 package variant is available.