MCT277G

$0.20

Description：OPTOISO 5.3KV TRANS W/BASE 6-DIP
Series：MCT27
Mfr：Isocom Components 2004 LTD
Package：Tube

SKU:3fbd9c479b7a Category: Transistor, Photovoltaic Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MCT277G is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISO 5.3KV TRANS W/BASE 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MCT277G

Description：OPTOISO 5.3KV TRANS W/BASE 6-DIP
Series：MCT27
Mfr：Isocom Components 2004 LTD
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：100% @ 10mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：15µs, 15µs (Max)
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：30V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MCT277G

MCT277G

Transistor, Photovoltaic Output Optoisolators Overview

The MCT277G is a single-element transistor output optocoupler manufactured by Isocom Components. It provides electrical isolation with a maximum insulation voltage of 5300 Vrms. The device utilizes a DIP-6 package and features a nominal current transfer ratio of 100%. It operates within a temperature range of -55 °C to 100 °C, with a collector-emitter breakdown voltage of at least 30 V.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides high-voltage electrical isolation between input and output circuits
Utilizes a standard six-pin dual in-line package for surface or through-hole mounting
Features a transistor output stage suitable for digital signal transmission

Transistor, Photovoltaic Output Optoisolators Applications

Industrial control systems requiring galvanic isolation
Signal isolation in measurement and testing equipment
Power supply feedback loops for circuit protection

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix 'G' against the manufacturer's official documentation to confirm compliance status and termination finish. Ensure the procurement specification matches the required isolation voltage and package type. Cross-reference the part number with the latest datasheet to confirm availability and any potential obsolescence notices from Isocom Components.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high isolation voltage is critical for safety or noise immunity. The transistor output configuration is suitable for interfacing with logic circuits. Consider the operating temperature range and package constraints during PCB layout. Verify that the current transfer ratio meets the drive requirements of the downstream load.

Transistor, Photovoltaic Output Optoisolators Part Context

This optocoupler belongs to the family of isolated semiconductor devices designed for signal transmission across electrically isolated barriers. It serves as a replacement for legacy components in industrial and consumer electronics where reliable galvanic isolation is necessary to protect sensitive control circuits from high-voltage transients.