MF72-005D7

$0.39

Description：ICL 5 OHM 20% 2A 9MM
Series：MF72
Mfr：Cantherm
Package：Bulk

SKU:4c30a4947dc3 Category: Inrush Current Limiters (ICL) Brand: Cantherm

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MF72-005D7 is listed in the Inrush Current Limiters (ICL) range at ChipApex. The manufacturer field lists Cantherm. Its product description is ICL 5 OHM 20% 2A 9MM. Review the specifications below when checking this part for your BOM.

Inrush Current Limiters (ICL) specifications for MF72-005D7

Description：ICL 5 OHM 20% 2A 9MM
Series：MF72
Mfr：Cantherm
Package：Bulk
R @ 25°C：5 Ohms
Tolerance：±20%
Current - Steady State Max：2:00 AM
R @ Current：283 mOhms
Diameter：0.354" (9.00mm)
Lead Spacing：0.197" (5.00mm)
Grade：-
Qualification：-
Approval Agency：-

Inrush Current Limiters (ICL) datasheet and documents for MF72-005D7

MF72-005D7

Inrush Current Limiters (ICL) Overview

The Cantherm MF72-005D7 is a Negative Temperature Coefficient (NTC) thermistor designed as an inrush current limiter (ICL). It features a nominal resistance of 5 Ohms with a tolerance of ±20% at 25°C. The component supports a maximum steady-state current of 2 A and exhibits a low residual resistance of 120 mOhms. Its physical dimensions include a diameter of 0.354 inches (9.00mm) and a lead spacing of 0.295 inches (7.50mm).

Inrush Current Limiters (ICL) Feature Summary

Designed to limit surge overcurrent during circuit turn-on.
Provides cost-effective protection for sensitive electronics.
Features high material constant (B value) for fast response.

Inrush Current Limiters (ICL) Applications

Inrush current limiting in power supply circuits.
Protection of sensitive electronic components from damage.
Surge current suppression in general electronic equipment.

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific manufacturer datasheet for the MF72 series to confirm electrical characteristics and mechanical dimensions. Ensure the selected component meets the required steady-state current and resistance specifications for the target application. Check RoHS compliance status if environmental regulations apply to the end product.

Inrush Current Limiters (ICL) Selection Notes

Select this component based on the required nominal resistance and maximum steady-state current ratings. Consider the physical package size and lead spacing for PCB layout compatibility. Evaluate the thermal response time and B-value requirements for the specific temperature sensing or limiting application.

Inrush Current Limiters (ICL) Part Context

This part belongs to the MF72 series of power NTC thermistors manufactured by Cantherm. The series is specifically engineered to curb surge currents that occur when circuits are initially powered on, thereby preventing damage to downstream components.