MOC3060X

$0.78

Description：OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP
Series：-
Mfr：Isocom Components 2004 LTD
Package：Tube

SKU:7f77984b6489 Category: Triac, SCR Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC3060X is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for MOC3060X

Description：OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP
Series：-
Mfr：Isocom Components 2004 LTD
Package：Tube
Output Type：Triac
Zero Crossing Circuit：Yes
Number of Channels：1
Voltage - Isolation：5300Vrms
Voltage - Off State：600 V
Static dV/dt (Min)：600V/µs
Current - LED Trigger (Ift) (Max)：30mA
Current - On State (It (RMS)) (Max)：-
Current - Hold (Ih)：400µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Operating Temperature：-40°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.300", 7.62mm)
Supplier Device Package：6-DIP
Approval Agency：UR, VDE

Triac, SCR Output Optoisolators datasheet and documents for MOC3060X

MOC3060X

Triac, SCR Output Optoisolators Overview

The MOC3060X is a zero-crossing triac output optocoupler manufactured by Isocom Components 2004 LTD. It features a 6-pin DIP package with an isolation voltage of 5300Vrms and a peak repetitive off-state voltage of 600V for the triac output. The device provides internal gate drive current limiting, eliminating the need for external series resistors. It operates within a temperature range of -55°C to +100°C and complies with EN60950, CECC 00802, UL, and VDE 0884 standards.

Triac, SCR Output Optoisolators Feature Summary

Zero-crossing detection ensures low electromagnetic interference during switching
Integrated gate drive current limiting simplifies circuit design
High isolation voltage supports safe interface between high and low voltage domains

Triac, SCR Output Optoisolators Applications

Solid state relay driver circuits
AC power control systems
Motor speed control applications

Triac, SCR Output Optoisolators Procurement Notes

Verify that the ordering suffix matches the required package type, as standard designations may vary. Confirm compliance requirements against specific regional safety standards such as UL or VDE before finalizing procurement. Ensure the component meets the thermal management needs of the target application environment.

Triac, SCR Output Optoisolators Selection Notes

Select this component when zero-crossing switching is required to minimize electrical noise in AC loads. The integrated current limiting allows for direct connection to logic outputs without additional series components. Consider the 600V blocking capability for standard mains voltage applications requiring robust isolation.

Triac, SCR Output Optoisolators Part Context

This part belongs to the MOC series of triac output optocouplers from Isocom Components 2004 LTD. The series is designed for industrial and consumer AC power control applications. The MOC3060X specifically addresses the need for reliable zero-crossing triggering in solid-state switching environments.