NJU7008F2-TE1

Description：IC OPAMP GP 1 CIRCUIT SC88A
Series：-
Mfr：Nisshinbo Micro Devices Inc.
Package：Tape & Reel (TR)

SKU:79471092bad8 Category: Instrumentation, Op Amps, Buffer Amps Brand: Nisshinbo Micro Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

NJU7008F2-TE1 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Nisshinbo Micro Devices Inc.. Its product description is IC OPAMP GP 1 CIRCUIT SC88A. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for NJU7008F2-TE1

Description：IC OPAMP GP 1 CIRCUIT SC88A
Series：-
Mfr：Nisshinbo Micro Devices Inc.
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：1
Output Type：-
Slew Rate：2.4V/µs
Gain Bandwidth Product：1 MHz
Current - Input Bias：1 pA
Voltage - Input Offset：4 mV
Current - Supply：200µA
Current - Output / Channel：200 µA
Voltage - Supply Span (Min)：1 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：5-TSSOP, SC-70-5, SOT-353
Supplier Device Package：SC-88A
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for NJU7008F2-TE1

NJU7008F2-TE1

Instrumentation, Op Amps, Buffer Amps Overview

The NJU7008F2-TE1 is a single-channel C-MOS operational amplifier in an SC88A package. It operates on a single supply from 1.0V to 5.5V with a maximum of 7.0V. Key electrical parameters include a maximum input offset voltage of 4mV, typical input bias current of 1pA, and operating current of 200µA at 3.0V. The device features a slew rate of 2.4V/µs, unity gain bandwidth of 1.0MHz, and large signal voltage gain of 70dB. Output swings rail-to-rail with source/sink currents up to 200µA.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Single low power supply operation starting at 1.0V
Low offset voltage for accurate small signal amplification
Rail-to-rail output swing capability
Integrated compensation capacitor

Instrumentation, Op Amps, Buffer Amps Applications

Portable electronic devices
Battery-powered instrumentation
Signal conditioning circuits near ground level

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix F2 against official documentation to confirm pinout or variant details. Ensure the SC88A package matches design constraints. Confirm RoHS compliance status through manufacturer datasheets before finalizing procurement specifications.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when ultra-low input bias current and low offset voltage are required for single-supply applications. Compare operating current and slew rate against system requirements. Verify that the SC88A package size fits the available PCB space.

Instrumentation, Op Amps, Buffer Amps Part Context

Part of the NJU7007/08 series of super small-sized single C-MOS operational amplifiers. Designed for low power and low offset voltage performance. Shares architectural similarities with the NJU7007 but offers higher speed characteristics.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Consult official substitution lists for verified equivalents. Generic op-amps may not match the specific rail-to-rail output or ultra-low bias current requirements without detailed parameter comparison.