NTE03-016LF

Inrush Current Limiters (ICL) Overview

The YAGEO NTE03-016LF is a Negative Temperature Coefficient (NTC) thermistor designed for inrush current limiting applications. It features a nominal resistance of 16 Ohms with a tolerance of ±15%. The component supports a maximum steady-state current of 3 Amperes and has a physical diameter of 13.50 mm (0.531 inches). It belongs to the NT series and is supplied in bulk packaging.

Inrush Current Limiters (ICL) Feature Summary

• Functions as an inrush current limiter to protect electronic circuits from high initial current spikes during power-up.
• Utilizes negative temperature coefficient characteristics where resistance decreases significantly as temperature rises, allowing efficient current flow after startup.

Inrush Current Limiters (ICL) Applications

• Power supply input stages
• Consumer electronics protection
• Industrial equipment circuitry

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific suffix LF against official YAGEO documentation to confirm lead-free compliance status. Confirm that the 16 Ohm resistance value matches the target circuit requirements. Ensure the 3 A current rating exceeds the application's peak load. Check for regional distribution restrictions or limited availability status before finalizing procurement plans.

Inrush Current Limiters (ICL) Selection Notes

Select this component based on the required 16 Ohm cold resistance and 3 A continuous current capacity. Evaluate the thermal environment to ensure the self-heating characteristics align with the system's operational limits. Consider the 13.50 mm package size for adequate board space and heat dissipation. Validate compatibility with the intended mounting method and PCB layout constraints.

Inrush Current Limiters (ICL) Part Context

This part belongs to YAGEO’s NT series of NTC thermistors. It serves as a specialized passive component within the broader thermistor category, distinct from general-purpose resistors like the RC0201DR series. The device is engineered specifically for transient suppression rather than signal conditioning or voltage division.

Inrush Current Limiters (ICL) Replacement Considerations

Cross-reference with other YAGEO NTE03 variants having similar resistance and current ratings. Verify that substitute parts maintain the same 13.50 mm diameter and ±15% tolerance. Ensure any replacement offers equivalent energy absorption capabilities and thermal response times.