OPA2369AIDCNR

$1.98

Description：IC OPAMP GP 2 CIRCUIT SOT23-8
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:e3eeb02153a9 Category: Instrumentation, Op Amps, Buffer Amps Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

OPA2369AIDCNR is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC OPAMP GP 2 CIRCUIT SOT23-8. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for OPA2369AIDCNR

Description：IC OPAMP GP 2 CIRCUIT SOT23-8
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR),Cut Tape (CT)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：0.005V/µs
Gain Bandwidth Product：12 kHz
Current - Input Bias：10 pA
Voltage - Input Offset：250 µV
Current - Supply：700nA (x2 Channels)
Current - Output / Channel：10 mA
Voltage - Supply Span (Min)：1.8 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：SOT-23-8
Supplier Device Package：SOT-23-8
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for OPA2369AIDCNR

OPA2369AIDCNR

Instrumentation, Op Amps, Buffer Amps Overview

The OPA2369AIDCNR is a dual-channel, low-power operational amplifier manufactured by Texas Instruments. It operates on a supply voltage range of 1.8 V to 5.5 V with a typical quiescent current of 700 nA per channel. Key electrical specifications include a gain-bandwidth product of 12 kHz, a slew rate of 5 mV/us, and an input offset voltage of 750 uV. The device features rail-to-rail input and output capabilities, a common-mode rejection ratio of 114 dB, and an input bias current of 50 pA. It is housed in an 8-SOT-23 package and supports operation within a temperature range of -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Dual-channel architecture designed for space-constrained applications
Rail-to-rail input and output signal swing capability
Ultra-low power consumption suitable for battery-powered systems

Instrumentation, Op Amps, Buffer Amps Applications

Portable medical instrumentation
Battery-operated sensor interfaces
Low-power data acquisition systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'R' indicates reel packaging when ordering. Confirm the A-grade designation matches required offset voltage tolerances. Ensure the SOT-23-8 footprint aligns with PCB layout constraints. Check moisture sensitivity levels for proper storage and reflow soldering profiles according to manufacturer guidelines.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for designs requiring minimal power draw while maintaining precision. The rail-to-rail I/O allows full signal utilization across the supply range. Compare against single-channel alternatives if only one amplifier is needed to reduce cost. Consider thermal performance within the specified operating temperature range.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the OPA2369 family of low-power, precision amplifiers. It shares core electrical characteristics with other variants in the series but differs in package type and quantity configuration. The dual-channel design integrates two independent amplifiers into a single compact footprint.