PI6C48535-01BLIEX

Clock Buffers, Drivers Overview

The PI6C48535-01BLIEX is a 3.3V low-skew fanout buffer manufactured by Diodes Incorporated, designed to translate single-ended LVTTL or LVCMOS clock signals into four differential LVPECL outputs. It supports a maximum operating frequency of 500 MHz with a typical propagation delay of 1.5 ns and output skew of 40 ps. The device features two selectable inputs (CLK0/CLK1) and an asynchronous enable pin for synchronized control. Operating on a 3.3V supply within the -40°C to +85°C industrial temperature range, it utilizes a 20-pin TSSOP package.

Clock Buffers, Drivers Feature Summary

• Translates single-ended LVTTL/LVCMOS inputs to four differential LVPECL outputs
• Maximum operation frequency of 500 MHz with 40 ps typical output skew
• Two selectable clock inputs (CLK0/CLK1) with asynchronous CLK_EN control
• Low additive jitter of 30 fs (typical) and 1.5 ns propagation delay

Clock Buffers, Drivers Applications

• Data-communications systems requiring clock translation
• Telecommunications platforms utilizing LVPECL interfaces
• High-frequency backplane distribution networks

Clock Buffers, Drivers Procurement Notes

Verify the 'E' suffix confirms Pb-free and Green compliance as specified in the datasheet. Confirm the 'X' suffix indicates Tape/Reel packaging if required for automated assembly. Ensure the specific ordering code matches the exact package width and lead form documented in the manufacturer's official ordering information section.

Clock Buffers, Drivers Selection Notes

Select this component when translating LVTTL or LVCMOS sources to LVPECL loads at frequencies up to 500 MHz. The device requires a 3.3V power supply and operates within the -40°C to +85°C range. Designers must account for the 130 mA typical supply current and implement proper termination for the LVPECL outputs to maintain signal integrity.

Clock Buffers, Drivers Part Context

This part belongs to the PI6C48535 series of low-skew fanout buffers. The base model PI6C48535-01B provides the core functionality, while the suffixes define physical attributes: 'L' denotes the 20-pin TSSOP package, 'E' indicates environmental compliance, and 'X' specifies tape and reel packaging.

Clock Buffers, Drivers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation.