PMEG6030ETP-QX

Single Diodes Overview

The PMEG6030ETP-QX is a silicon Schottky barrier rectifier manufactured by Nexperia, designed for surface-mount applications. It features a single configuration within an SOD-128-2 package. Key electrical parameters include a maximum repetitive reverse voltage of 60 V and an average forward current rating of 3 A. The device exhibits a typical forward voltage of 460 mV at rated current and supports a forward surge current of 50 A. Reverse leakage current is specified at 200 uA. Power dissipation capability reaches 2.5 W, with an operating temperature range spanning from -55 C to +175 C.

Single Diodes Feature Summary

• Low forward voltage characteristics for improved efficiency
• High surge current robustness for transient protection
• Clip bond technology enabling high power capability
• Flat lead SMD plastic package with exposed heatsink

Single Diodes Applications

• Low voltage rectification
• High efficiency DC-to-DC conversion
• Switch mode power supply (SMPS)
• Reverse polarity protection

Single Diodes Procurement Notes

Verify the specific suffix 'QX' against official Nexperia documentation to confirm automotive qualification status under AEC-Q101 standards. Ensure the ordering part number matches the required packaging format, such as reel or cut tape, as indicated in the manufacturer's datasheet. Cross-reference the component marking code to distinguish between standard and qualified variants during receipt inspection.

Single Diodes Selection Notes

Select this component when designing circuits requiring a 60 V blocking voltage with a 3 A continuous current capacity in a compact SOD-128 footprint. The low forward voltage drop makes it suitable for low-loss rectification paths. Verify thermal management requirements given the 2.5 W power dissipation rating and ensure the PCB layout accommodates the exposed pad for optimal heat transfer.

Single Diodes Part Context

This component belongs to the PMEG series of Planar Schottky barrier rectifiers from Nexperia. The series utilizes clip-bonding technology to enhance power handling capabilities within small surface-mount packages. These devices are engineered for high reliability and are commonly integrated into automotive and industrial power electronics where space constraints and thermal performance are critical design factors.

Single Diodes Replacement Considerations

Direct substitutes include PMEG6030EVPX and PMEG6030EXE-QX. Verify pinout compatibility and thermal resistance differences before substitution. Ensure the replacement part meets the same AEC-Q101 automotive qualification requirements if applicable to the original design intent.