S-1335K12-M5T1U3

$0.43

Description：IC REG LINEAR 1.2V 150MA SOT23-5
Series：S-1335
Mfr：ABLIC Inc.
Package：Tape & Reel (TR)

SKU:99dd3e372eb1 Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: ABLIC Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

S-1335K12-M5T1U3 is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists ABLIC Inc.. Its product description is IC REG LINEAR 1.2V 150MA SOT23-5. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for S-1335K12-M5T1U3

Description：IC REG LINEAR 1.2V 150MA SOT23-5
Series：S-1335
Mfr：ABLIC Inc.
Package：Tape & Reel (TR)
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：1
Voltage - Input (Max)：5.5V
Voltage - Output (Min/Fixed)：1.2V
Voltage - Output (Max)：-
Voltage Dropout (Max)：0.224V @ 100mA
Current - Output：150mA
Current - Quiescent (Iq)：1 µA
Current - Supply (Max)：54 µA
PSRR：80dB ~ 70dB (1kHz ~ 10KHz)
Control Features：Enable
Protection Features：Overcurrent, Soft-Start
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：SC-74A, SOT-753
Supplier Device Package：SOT-23-5

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for S-1335K12-M5T1U3

S-1335K12-M5T1U3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The S-1335K12-M5T1U3 is a CMOS LDO voltage regulator from the S-1335 series, manufactured by ABLIC Inc. It provides a fixed output voltage of 1.2 V with a maximum output current of 150 mA. The device operates within an input voltage range supporting outputs from 1 V to 3.6 V and features a typical power supply rejection ratio (PSRR) of 80 dB. Key electrical parameters include a maximum dropout voltage of 224 mV, line regulation of 0.05 %/V, and load regulation of 15 mV. Quiescent current is specified at 36 uA. The component is housed in an SOT-23-5 package and supports surface mount installation.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

High ripple rejection capability with typical PSRR of 80 dB for noise-sensitive applications
Ultra-low quiescent current consumption of 36 uA for extended battery life
Integrated overcurrent protection and thermal shutdown for system safety

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Portable electronic devices requiring low-power linear regulation
Battery-powered sensor nodes and IoT modules
Embedded systems utilizing CMOS logic families

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify the specific suffix codes against official ABLIC documentation to confirm pinout compatibility and electrical tolerances. Ensure the ordering quantity aligns with manufacturer reel specifications. Confirm RoHS compliance status through the latest datasheet revision before finalizing procurement contracts.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component when a fixed 1.2 V rail is required with minimal static power draw. The SOT-23-5 package suits space-constrained designs. Evaluate thermal dissipation requirements based on the 600 mW power dissipation limit and ambient operating conditions ranging from -40 C to +85 C.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This part belongs to the S-1335 series of high ripple rejection LDO regulators. It utilizes CMOS technology to achieve low current consumption while maintaining stable output voltages. The series is designed for general-purpose power management in portable electronics where efficiency and noise performance are critical.