SG-8101CB 64.2000M-TBGSA0

Oscillators Overview

The SG-8101CB 64.2000M-TBGSA0 is a standard CMOS crystal oscillator manufactured by Epson Timing. It operates at a frequency of 64.2 MHz with a frequency stability of ±15 ppm. The device supports supply voltages ranging from 1.8V to 3.3V and features a standby function for power management. Typical supply current is 6.8 mA, while the disabled current is typically 1.1 µA. It is housed in a 4-SMD, no-lead package measuring 5.00mm x 3.20mm x 1.30mm max. The unit is rated for an operating temperature range of -40°C to +85°C.

Oscillators Feature Summary

• Integrated CMOS output driver for direct logic interface
• Low power consumption with dedicated standby mode capability
• Compact surface-mount form factor suitable for space-constrained designs

Oscillators Applications

• General-purpose clock generation for digital circuits
• Timing reference for microprocessors and microcontrollers
• Clock source for communication interfaces requiring 64.2 MHz

Oscillators Procurement Notes

Verify the specific frequency tolerance and load capacitance requirements against the system design specifications before procurement. Confirm that the 4-SMD footprint dimensions align with the PCB layout constraints. Ensure the selected supply voltage falls within the 1.8V to 3.3V operational range to guarantee correct functionality and current consumption profiles.

Oscillators Selection Notes

Select this component when a precise 64.2 MHz timing signal is required with moderate stability. Consider the ±15 ppm frequency stability as sufficient for most general digital applications. Evaluate the power budget to account for the 6.8 mA typical active current. The standby feature should be utilized if power efficiency during idle states is a critical design parameter.

Oscillators Part Context

This part belongs to the SG-8101CB series of standard oscillators from Epson Timing. The series is characterized by its small size and low power consumption. The SG-8101CB variant specifically offers CMOS outputs and supports a wide voltage range. It is designed for high-volume manufacturing applications requiring reliable clock signals in consumer and industrial electronics.

Oscillators Replacement Considerations

Direct replacements must match the 64.2 MHz frequency, 4-SMD 5x3.2 package, and CMOS output type. Verify compatibility with the 1.8V-3.3V supply range and ±15 ppm stability requirement. Cross-reference pinout configurations to ensure electrical interchangeability without circuit modification.