SN74HCT04PWR

Inverter Gates Overview

The SN74HCT04PWR is a hex inverter integrated circuit from the Texas Instruments SNx4HCT04 series. It operates within a supply voltage range of 4.5V to 5.5V and features six independent inverters performing the Boolean function Y = A. The device provides ±4-mA output drive at 5V, with typical propagation delays of 13ns at 5.5V and 20ns at 4.5V under 50pF load conditions. It utilizes a 14-pin TSSOP package measuring 5.00 mm by 4.40 mm.

Inverter Gates Feature Summary

• Contains six independent inverters for Boolean logic inversion
• TTL-voltage compatible inputs allowing direct interface with TTL loads
• Low power consumption with maximum supply current of 20μA
• Capable of driving up to 10 LSTTL loads

Inverter Gates Applications

• General-purpose digital logic signal inversion
• Clock signal generation and conditioning
• Interface between TTL and CMOS logic families
• Buffering and line driving applications

Inverter Gates Procurement Notes

Verify the specific ordering suffix 'PWR' corresponds to the active production status and tape-and-reel packaging format. Confirm RoHS compliance and lead finish specifications against the latest manufacturer documentation before finalizing procurement orders.

Inverter Gates Selection Notes

Select this component when a 14-pin surface-mount hex inverter is required. Ensure the application environment remains within the -40°C to 85°C operating temperature range. Verify that the 4.5V to 5.5V supply voltage constraints align with the system design requirements.

Inverter Gates Part Context

This part belongs to the SNx4HCT04 family of hex inverters manufactured by Texas Instruments. The HCT logic series is designed to be fully compatible with standard TTL logic levels while utilizing CMOS technology for lower power consumption compared to older bipolar logic families.

Inverter Gates Replacement Considerations

SN74HCT04PWRG4.A

Inverter Gates FAQ

What is the recommended bypass capacitor value?

A 0.1-μF capacitor is recommended for each VCC terminal to prevent power disturbances.

How should unused inputs be handled?

All unused inputs must be connected to either VCC or GND to prevent undefined operational states caused by floating voltages.