SX3M3.000B20F30TNN

Oscillators Overview

The SX3M3.000B20F30TNN is a standard CMOS crystal oscillator manufactured by Shenzhen SCTF Electronics. It operates at a nominal frequency of 3 MHz with a supply voltage range of 1.62V to 3.63V. The device features a total frequency tolerance of ±20ppm and an additional load capacitance tolerance of ±30ppm. It consumes a maximum current of 90uA and utilizes a 4-SMD, No Lead package.

Oscillators Feature Summary

• CMOS compatible logic levels for direct interface with digital circuits
• Low power consumption suitable for battery-operated applications
• Standard reflow soldering compatibility for surface mount assembly

Oscillators Applications

• Portable consumer electronics
• Battery-powered devices requiring low standby current
• General purpose timing circuits in compact systems

Oscillators Procurement Notes

Verify the specific ordering suffix against the manufacturer's official specification sheet to ensure correct voltage and tolerance configurations. Confirm that the 4-SMD package dimensions match the target PCB footprint. Check for RoHS compliance documentation if environmental regulations apply to the final product assembly process.

Oscillators Selection Notes

Select this component when a 3 MHz clock signal is required with minimal power draw. Ensure the operating temperature range meets the application environment. Verify that the CMOS output swing is compatible with the receiving logic input thresholds of the connected microcontroller or system bus.

Oscillators Part Context

This part belongs to the SX3M series of surface mount oscillators from Shenzhen SCTF Electronics. The series offers various frequencies within the low-power category. The model designation indicates a 3 MHz frequency, B20 frequency stability, F30 load tolerance, and TNN packaging configuration.

Oscillators Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Cross-reference with other 3 MHz, 4-SMD CMOS oscillators only after verifying pinout and electrical parameter compatibility.