SX3M50.000A10F20TNN

Oscillators Overview

The SX3M50.000A10F20TNN is a surface-mount crystal oscillator manufactured by Shenzhen SCTF Electronics. It operates at a frequency of 50 MHz with a CMOS output type. The device requires a supply voltage of 5V and draws a current of 20mA. Frequency stability is specified at ±10ppm over the operating temperature range of -40°C to +85°C. Additional stability parameters include ±20ppm total allowable tolerance. The component is housed in an SMD3225-4P package, designed for standard clock signal generation applications requiring high reliability.

Oscillators Feature Summary

• CMOS output interface for digital logic compatibility
• Surface-mount SMD3225-4P package design
• Wide industrial temperature range operation

Oscillators Applications

• General purpose clock signal generation
• Microprocessor and microcontroller timing
• Communication equipment synchronization

Oscillators Procurement Notes

Verify the specific ordering suffix 'A' against official datasheets to confirm 5V supply requirements, as other suffixes like 'B' may indicate different voltage levels such as 3.3V. Ensure the package code matches SMD3225-4P dimensions. Confirm RoHS compliance status if required by assembly specifications. Cross-reference part numbers carefully to avoid confusion with similar variants from the same manufacturer family.

Oscillators Selection Notes

Select this component when a 50 MHz CMOS clock source is required within a compact SMD3225 footprint. The ±10ppm stability suits most digital systems. Verify that the system power rail provides a stable 5V supply, as this model does not support lower voltages like 3.3V. Consider thermal management if multiple units are placed closely together on the PCB.

Oscillators Part Context

This part belongs to the SX3M series of surface-mount oscillators from Shenzhen SCTF Electronics. The series offers various frequencies and packages. The 'SX3M' prefix typically denotes a standard XO (Crystal Oscillator) configuration. Variants differ by supply voltage, output type, and stability ratings, making precise model identification critical for circuit design compatibility.

Oscillators Replacement Considerations

Direct substitutes must match the 50MHz frequency, CMOS output, 5V supply, and SMD3225-4P package. Models with different suffixes, such as SX3M50.000B10F20TNN, operate at 3.3V and are not electrically compatible without circuit modification. Verify pinout and electrical characteristics before substitution.