TLP626-2

$0.35

Description：OPTOISOLTR 5.3KV 2CH TRANS 8-DIP
Series：TLP626-2
Mfr：Isocom Components 2004 LTD
Package：Tube

SKU:137c1866474f Category: Transistor, Photovoltaic Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TLP626-2 is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISOLTR 5.3KV 2CH TRANS 8-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for TLP626-2

Description：OPTOISOLTR 5.3KV 2CH TRANS 8-DIP
Series：TLP626-2
Mfr：Isocom Components 2004 LTD
Package：Tube
Number of Channels：2
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：100% @ 1mA
Current Transfer Ratio (Max)：1200% @ 1mA
Turn On / Turn Off Time (Typ)：10µs, 8µs
Rise / Fall Time (Typ)：8µs, 8µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：55V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.15V
Current - DC Forward (If) (Max)：50 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for TLP626-2

TLP626-2

Transistor, Photovoltaic Output Optoisolators Overview

The TLP626-2 is a dual-channel optocoupler manufactured by Isocom Components 2004 LTD. It features two gallium arsenide infrared emitting diodes connected in inverse parallel, optically coupled to photo-transistors. The device provides an isolation voltage of 5300Vrms and operates with a collector-emitter voltage of 55V minimum. It supports a maximum input current of 50mA and offers a typical current transfer ratio of 100%. The component is housed in an 8-pin DIP package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Dual isolated channels for simultaneous signal transmission
Inverse parallel LED configuration for AC input compatibility
High insulation strength ensuring safe circuit separation

Transistor, Photovoltaic Output Optoisolators Applications

Programmable controllers
AC/DC input modules
Telecommunication equipment

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the manufacturer designation carefully, as this part number is originally associated with Toshiba Semiconductor. Ensure the specific Isocom Components 2004 LTD variant matches the required electrical specifications and package dimensions. Confirm that the 8-pin DIP form factor aligns with the target PCB layout before finalizing the order.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when dual-channel isolation is required for AC or DC input sensing applications. The inverse parallel LED design allows direct AC signal coupling without additional rectification components. Consider the 5300Vrms isolation rating for high-voltage safety requirements in industrial control systems.

Transistor, Photovoltaic Output Optoisolators Part Context

This device belongs to the TLP626 series of low input current phototransistor optocouplers. The series includes variants with different channel counts, such as the single-channel TLP626 and the four-channel TLP626-4. These components are designed for general-purpose isolation in digital logic circuits.