0ZRB0600FF1A

Ptc Resettable Fuses Overview

The Bel Fuse 0ZRB0600FF1A is a radial leaded PPTC resettable fuse designed for circuit protection. It features a hold current of 6 A and a trip current of 12 A, operating at a maximum voltage of 30 VDC. The device exhibits an initial resistance of 40 Ohms and supports a maximum rated current of 100 A. It functions within a temperature range of -40°C to +85°C. Packaged in bulk, this slow-blow component provides reliable overcurrent protection for low-voltage DC applications.

Ptc Resettable Fuses Feature Summary

• Provides automatic circuit interruption upon overcurrent conditions
• Offers repeatable protection without manual replacement
• Designed for radial through-hole PCB mounting

Ptc Resettable Fuses Applications

• Low voltage DC power distribution systems
• Consumer electronics circuit protection
• Industrial control board safeguarding

Ptc Resettable Fuses Procurement Notes

Verify the specific package type and lead configuration against the official datasheet before integration. Confirm that the thermal environment allows for proper heat dissipation during tripping events. Ensure the holding current rating aligns with the continuous operational load requirements of the target application circuit.

Ptc Resettable Fuses Selection Notes

Select this component when a 6 A hold current and 30 VDC rating are required. Consider the 40 Ohm initial resistance impact on circuit startup. Evaluate the slow-blow characteristic against potential inrush currents. Verify compatibility with standard radial mounting footprints and available board space constraints.

Ptc Resettable Fuses Part Context

This part belongs to the 0ZRB series of radial PTC resettable fuses from Bel Fuse. It serves as a reusable alternative to traditional one-time fuses in low-voltage DC circuits. The series is engineered for robust performance in consumer and industrial electronics where space efficiency and cost-effectiveness are prioritized.

Ptc Resettable Fuses Replacement Considerations

Direct substitutes must match the 6 A hold current, 30 VDC max voltage, and radial leaded package. Verify equivalent trip current and resistance values to ensure identical circuit behavior.