1N4715 TR PBFREE

Single Zener Diodes Overview

The Central Semiconductor Corp 1N4715 TR PBFREE is a silicon Zener diode designed for low-level applications requiring extremely low operating current and leakage. It features a nominal Zener voltage of 36 V with a 5% tolerance, tested at 50 μA. The device supports a maximum power dissipation of 500 mW and operates within a junction temperature range of -65°C to +200°C. Packaged in the DO-35 axial leaded case, it offers a maximum reverse leakage current of 0.01 μA at 27.3 V.

Single Zener Diodes Feature Summary

• Designed for applications requiring extremely low operating current and low leakage
• Provides stable voltage regulation with tight 5% tolerance
• Capable of operation across an extended temperature range up to +200°C

Single Zener Diodes Applications

• Low-level voltage reference circuits
• Precision voltage regulation requiring minimal bias current
• Temperature-stable protection circuits

Single Zener Diodes Procurement Notes

Verify that the ordering suffix matches the required plating finish. The 'PBFREE' designation indicates lead-free plating compliance. Confirm the package type corresponds to the DO-35 axial leaded form factor. Ensure the specific part number aligns with the manufacturer's standard naming conventions for this series.

Single Zener Diodes Selection Notes

Select this component when circuit design demands a 36 V reference with minimal quiescent current draw. The 500 mW power rating suits moderate load conditions. Verify that the DO-35 package fits the board layout constraints. Consider the low leakage specification for high-impedance signal paths.

Single Zener Diodes Part Context

This device belongs to the 1N4678 through 1N4717 series of low-level silicon Zener diodes. The series covers a voltage range from 1.8 V to 43 V. All devices in this family share identical mechanical outlines and thermal characteristics while differing in nominal breakdown voltage.

Single Zener Diodes Replacement Considerations

Cross-reference with other manufacturers offering 1N4715 equivalents in the DO-35 package. Verify that substitute parts meet the 50 μA test current requirement and maintain comparable leakage specifications.