24M8PI/XT114-10/20

Crystals Overview

The YIC 24M8PI/XT114-10/20 is a surface-mount quartz crystal operating at a fundamental frequency of 24 MHz. It features a compact 4-SMD, no-lead package with dimensions of 1.6mm x 1.2mm and a maximum height of 0.60mm. The component exhibits a frequency tolerance of ±10ppm and a load capacitance of 8pF. Equivalent Series Resistance (ESR) is specified at 150 Ohms. It supports an operating temperature range of -40°C to +85°C and complies with RoHS3 standards.

Crystals Feature Summary

• Compact 1.6x1.2mm SMD footprint suitable for space-constrained designs
• Fundamental mode operation for stable clock generation
• Wide industrial temperature range capability
• Low profile construction with no-lead termination

Crystals Applications

• Embedded communication systems requiring precise timing
• Microcontroller clock sources in portable devices
• Industrial control nodes with thermal variability
• High-density circuit board layouts

Crystals Procurement Notes

Verify the specific load capacitance requirement against the host oscillator circuit design before procurement. Confirm that the 150 Ohm ESR value aligns with the driving strength capabilities of the target microcontroller or clock generator. Ensure the selected variant matches the required operating temperature range for the intended application environment. Cross-reference the package dimensions with the PCB footprint to guarantee mechanical compatibility during assembly.

Crystals Selection Notes

Select this component when a small form factor is critical for the design. The 24 MHz frequency is standard for many embedded processors. Consider the 150 Ohm ESR when designing the oscillator circuit to ensure reliable startup. The wide temperature range makes it suitable for harsh environments. Verify that the 8pF load capacitance matches the system requirements to maintain frequency accuracy.

Crystals Part Context

This part belongs to the XT114 series from YIC-Electronics, which focuses on miniature surface-mount crystals. The series offers various frequencies and load capacitances within the 1.6x1.2mm package. It is designed for applications where size reduction is prioritized without compromising electrical performance. The XT114 series complements larger packages like XT214 and XT224 for different spatial constraints.

Crystals Replacement Considerations

The document identifies 24M8PI/XT214-10/20 as a similar substitute type. Note that the XT214 variant uses a larger 2.0x1.6mm package compared to the 1.6x1.2mm XT114. Ensure mechanical clearance exists if substituting with the larger package. Other parameters such as frequency, tolerance, and load capacitance appear consistent between these variants.