403I35S32M00000

Crystals Overview

The CTS-Frequency Controls 403I35S32M00000 is a surface-mount crystal resonator operating at a fundamental frequency of 32 MHz. It features a frequency tolerance of ±30 ppm and stability of ±50 ppm. The component utilizes a 4-SMD, no-lead package with dimensions of 3.20mm x 2.50mm and a maximum height of 0.75mm. It has an equivalent series resistance (ESR) of 60 Ohms and operates within a temperature range of -20°C to 70°C. The device is RoHS compliant and classified under MSL level 1.

Crystals Feature Summary

• Fundamental mode operation for precise frequency generation
• Compact 4-SMD no-lead surface mount design
• Compliant with RoHS3 environmental standards

Crystals Applications

• General purpose clock signal generation in electronic circuits
• Microcontroller system timing references
• Communication interface synchronization

Crystals Procurement Notes

Verify the specific suffix 'S' against the official CTS datasheet to confirm package dimensions and lead-free status. Ensure the load capacitance requirements of the target circuit match the component specifications. Confirm availability through authorized distributors as standard stock may be limited. Cross-reference the ECCN classification for export compliance if applicable to your region.

Crystals Selection Notes

Select this component when a 32 MHz fundamental frequency is required in a compact SMD footprint. Consider the ±30 ppm tolerance for applications needing moderate frequency accuracy. Evaluate the 60 Ohm ESR against the oscillator circuit's drive level constraints. Verify that the -20°C to 70°C operating range meets the environmental conditions of the final assembly.

Crystals Part Context

This part belongs to the CTS 403 Series of surface-mount crystals. The series offers various frequencies and packages optimized for space-constrained designs. The 403I35S32M00000 specifically targets applications requiring a 32 MHz reference in a small form factor. It is distinct from higher-frequency oscillators or larger through-hole variants.

Crystals Replacement Considerations

The 403I35S32M00000 can be replaced by the 403I35S32M00000 variant if available, which shares identical electrical characteristics. Ensure any substitute maintains the same 4-SMD package dimensions and pin configuration to fit existing footprints.