532EC000813DG

Pin ConfigurableSelectable Oscillators Overview

The Skyworks 532EC000813DG is a standard clock oscillator from the Si532 series, designed for dual-frequency operation. It supports output frequencies of 125 MHz and 644.53125 MHz within the 10-1417 MHz range. The device features LVPECL output format with a frequency stability of 7 PPM. It operates on a 2.5 V supply voltage, ranging from 2.25 V to 2.75 V, and draws a maximum current of 111 mA. Housed in a 7 mm x 5 mm SMD package, it functions between -40°C and +85°C.

Pin ConfigurableSelectable Oscillators Feature Summary

• Dual-frequency capability supporting two distinct output rates
• Low jitter performance typical of 0.3 ps phase jitter
• Configurable enable pin functionality
• LVPECL differential output interface

Pin ConfigurableSelectable Oscillators Applications

• High-speed data transmission systems
• Telecommunications infrastructure equipment
• Network synchronization modules
• Test and measurement instrumentation

Pin ConfigurableSelectable Oscillators Procurement Notes

Verify the specific suffix against official documentation to confirm packaging configuration. The 'DG' suffix indicates cut-tape or tube packaging, while 'DGR' denotes reel packaging. Ensure the ordering quantity aligns with the manufacturer's minimum order requirements for the selected packaging type. Cross-reference the datasheet revision to confirm electrical parameters match the design specifications before procurement.

Pin ConfigurableSelectable Oscillators Selection Notes

Select this component when dual-frequency generation is required within a single footprint. The LVPECL output suits high-speed digital interfaces requiring differential signaling. Verify that the 7 PPM stability meets system timing requirements. Consider the 2.5 V supply constraint and ensure power budget accommodates the 111 mA maximum current draw during active operation.

Pin ConfigurableSelectable Oscillators Part Context

This part belongs to the Si532 family of dual-frequency oscillators. It complements single-frequency models like the 531EC series by offering two selectable outputs. The device shares the same 7x5 mm package dimensions as other Si532 variants, facilitating board layout consistency across different frequency configurations within the same product line.

Pin ConfigurableSelectable Oscillators Replacement Considerations

• 532EC000813DGR (Reel packaging equivalent)

Pin ConfigurableSelectable Oscillators FAQ

What is the difference between the DG and DGR suffixes?

The DG suffix indicates cut-tape or tube packaging, while the DGR suffix specifies reel packaging. The electrical characteristics remain identical.

Does the OE pin control both frequencies simultaneously?

Yes, the enable pin controls the output state for the selected frequency configuration.