AD8038AKSZ-REEL7

Instrumentation, Op Amps, Buffer Amps Overview

The AD8038AKSZ-REEL7 is a single-channel, low-power voltage feedback operational amplifier manufactured by Analog Devices Inc. It features a 350 MHz bandwidth and a 425 V/µs slew rate with a typical quiescent current of 1.0 mA. The device operates on a supply voltage range of 3 V to 12 V and is housed in a 5-lead SC-70 package. Key electrical parameters include an input offset voltage of up to 3 mV, an input bias current of 750 nA maximum, and an input voltage noise density of 8 nV/√Hz at 100 kHz.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• High-speed performance with 350 MHz bandwidth and 425 V/µs slew rate
• Low power consumption with 1.0 mA typical quiescent current per amplifier
• Optimized for driving capacitive loads up to 15 pF without external components
• Wide input common-mode range extending within 1 V of either supply rail

Instrumentation, Op Amps, Buffer Amps Applications

• Battery-powered instrumentation
• Filters
• A/D drivers
• Level shifting
• Buffering

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific ordering suffix AKSZ corresponds to the 5-lead SC-70 package configuration. Confirm that the REEL7 designation indicates tape and reel packaging. Ensure the component meets RoHS compliance requirements for your target application. Cross-reference the manufacturer part number with official distributor catalogs to validate authenticity and revision status before procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when space-constrained designs require high-speed amplification with minimal power draw. The SC-70 package is suitable for dense PCB layouts where small footprint is critical. Consider the 1 V output swing limitation relative to the supply voltage when designing for maximum dynamic range. Verify that the load capacitance does not exceed 15 pF to maintain stability without additional series resistors.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the AD8038/AD8039 family of low-power, high-speed voltage feedback amplifiers. The AD8038 represents the single-channel variant, while the AD8039 provides dual channels. Both utilize Analog Devices' proprietary XFCB process technology to achieve low noise and high speed at reduced quiescent currents. The family supports industrial temperature ranges from -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.