AD822BR-REEL

Description：IC OPAMP GP 2 CIRCUIT 8SOIC
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR)

SKU:768fb9cd3c8e Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

AD822BR-REEL is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC OPAMP GP 2 CIRCUIT 8SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for AD822BR-REEL

Description：IC OPAMP GP 2 CIRCUIT 8SOIC
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：3V/µs
Gain Bandwidth Product：1.9 MHz
Current - Input Bias：2 pA
Voltage - Input Offset：300 µV
Current - Supply：1.24mA
Current - Output / Channel：20 mA
Voltage - Supply Span (Min)：5 V
Voltage - Supply Span (Max)：30 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：1.9 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for AD822BR-REEL

AD822BR-REEL

Instrumentation, Op Amps, Buffer Amps Overview

The AD822BR-REEL is a single-supply, rail-to-rail, low-power FET-input operational amplifier manufactured by Analog Devices Inc. It features a wide gain-bandwidth product of 1 MHz and a high slew rate of 0.6 V/µs. The device operates with a supply voltage range of 2.7 V to 36 V and draws a typical quiescent current of 45 µA per channel. Input offset voltage is specified at a maximum of 2 mV, with input bias current limited to 2 pA. It supports an output swing within 10 mV of the rails and functions reliably across an industrial temperature range from -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

FET-input architecture providing ultra-low input bias current for minimal signal loading
Rail-to-rail output capability ensuring maximum dynamic range in single-supply applications
Low power consumption suitable for battery-operated systems

Instrumentation, Op Amps, Buffer Amps Applications

Battery-powered instrumentation
Active filters
Transducer amplifiers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify component authenticity through authorized distribution channels due to potential counterfeits. Confirm RoHS compliance status as indicated on official datasheets. Check for specific ordering suffixes that may affect packaging or grade. Ensure storage conditions meet moisture sensitivity level requirements prior to soldering.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when low input bias current and rail-to-rail output are required in single-supply designs. Compare against other low-power op-amps based on specific offset voltage and bandwidth needs. Consider package availability and thermal performance for PCB layout constraints.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the AD822 family of precision operational amplifiers designed for low-power applications. It shares architectural similarities with other FET-input devices but offers specific rail-to-rail output characteristics. The series is commonly used in portable electronics and sensor interfaces where power efficiency is critical.