AD8506ARMZ-R7

$3.23

Description：IC CMOS 2 CIRCUIT 8MSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:07bdf973f6c0 Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

AD8506ARMZ-R7 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC CMOS 2 CIRCUIT 8MSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for AD8506ARMZ-R7

Description：IC CMOS 2 CIRCUIT 8MSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
Amplifier Type：CMOS
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：0.013V/µs
Gain Bandwidth Product：95 kHz
Current - Input Bias：1 pA
Voltage - Input Offset：500 µV
Current - Supply：15µA (x2 Channels)
Current - Output / Channel：45 mA
Voltage - Supply Span (Min)：1.8 V
Voltage - Supply Span (Max)：5 V
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package：8-MSOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for AD8506ARMZ-R7

AD8506ARMZ-R7

Instrumentation, Op Amps, Buffer Amps Overview

The AD8506ARMZ-R7 is a dual micro-power operational amplifier from Analog Devices, featuring rail-to-rail input and output swings. It operates on a single supply of 1.8 V to 5 V or dual supplies of ±0.9 V to ±2.5 V. The device offers a maximum supply current of 20 μA per amplifier, a typical offset voltage of 0.5 mV, and a maximum of 2.5 mV. It provides a gain bandwidth product of 95 kHz and a slew rate of 13 mV/μs. Noise performance includes 45 nV/√Hz at 1 kHz and 2.8 μV p-p from 0.1 Hz to 10 Hz. Input bias current is typically 1 pA.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Zero input crossover distortion achieved through an internal charge pump technology that powers the input differential pair.

Instrumentation, Op Amps, Buffer Amps Applications

Pressure and position sensors
Bio sensors
IR thermometers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific package variant against the datasheet ordering guide, as the AD8506 family includes MSOP and WLCSP options. Confirm the suffix matches the required reel quantity and tape specifications for automated assembly processes. Ensure the temperature range aligns with industrial requirements.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for battery-powered applications requiring high precision over varying supply voltages. The zero crossover distortion ensures stable CMRR across the full input common-mode range. Consider the low noise density for sensitive signal conditioning tasks where power consumption must remain minimal.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the AD8505/AD8506/AD8508 series of zero crossover distortion amplifiers. The AD8506 specifically denotes the dual-channel configuration within this family. These devices are designed to minimize errors caused by battery discharge while maintaining high accuracy in low-voltage environments.