ATEX50P35

Overview

The Hoffman Enclosures ATEX50P35 is a steel mounting panel designed for ZONEX HL Series enclosures. It measures 500 x 350 mm (19.69 x 13.78 inches) with a thickness of 12 gauge. The unit features a white polyester powder paint finish and complies with NEMA 4X, 12, and IEC IP66 standards. Certified for hazardous locations under ATEX requirements, it serves as a structural back panel for industrial electrical protection systems.

Feature Summary

• Certified for use in hazardous locations
• Corrosion-resistant polyester powder coating
• Compliant with NEMA 4X and IP66 ingress protection

Applications

• ZONEX HL Series enclosure assembly
• Hazardous location electrical installations
• Industrial control panel construction

Procurement Notes

Verify that the specific project environment requires ATEX certification before procurement. Confirm compatibility with the intended ZONEX enclosure model dimensions. Ensure the 12-gauge steel specification meets local structural load requirements. Check for any regional variations in the white polyester finish durability ratings.

Selection Notes

Select this panel only when integrating with Hoffman ZONEX HL Series housings. The 12-gauge steel provides robust mechanical support. The white finish aids in visual inspection. Verify that the NEMA 4X rating aligns with the site's environmental exposure levels to ensure adequate sealing against dust and water.

Part Context

This component belongs to the Hoffman ZONEX product line, specialized for hazardous area applications. It functions as a replacement or accessory panel rather than a standalone enclosure. The part supports the modular design philosophy of the HL Series, allowing for customized internal layouts within certified protective housing.

Replacement Considerations

No direct substitute part numbers are publicly confirmed for this specific panel dimension and certification combination.