BD15GA3VEFJ-ME2

$0.78

Description：IC REG LIN 1.5V 300MA 8-HTSOP-J
Series：-
Mfr：Rohm Semiconductor
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:f824ab0e2a8d Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Rohm Semiconductor

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

BD15GA3VEFJ-ME2 is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC REG LIN 1.5V 300MA 8-HTSOP-J. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for BD15GA3VEFJ-ME2

Description：IC REG LIN 1.5V 300MA 8-HTSOP-J
Series：-
Mfr：Rohm Semiconductor
Package：Tape & Reel (TR),Cut Tape (CT)
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：1
Voltage - Input (Max)：14V
Voltage - Output (Min/Fixed)：1.5V
Voltage - Output (Max)：-
Voltage Dropout (Max)：1.2V @ 300mA
Current - Output：300mA
Current - Quiescent (Iq)：1.2 mA
Current - Supply (Max)：-
PSRR：-
Control Features：Enable, Soft Start
Protection Features：Over Current, Over Temperature, Short Circuit
Operating Temperature：-40°C ~ 105°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width) Exposed Pad
Supplier Device Package：8-HTSOP-J
Grade：Automotive
Qualification：AEC-Q100

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for BD15GA3VEFJ-ME2

BD15GA3VEFJ-ME2

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The BD15GA3VEFJ-ME2 is a single-output fixed low-dropout linear regulator manufactured by ROHM Semiconductor. It provides a stable 1.5 V output with a maximum current capacity of 300 mA. The device operates within an input voltage range of 4.5 V to 14 V and features a typical dropout voltage of 600 mV, with a maximum of 900 mV. Designed for automotive environments, it supports temperatures from -40°C to +105°C and holds AEC-Q100 qualification.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

AEC-Q100 qualified for automotive reliability standards
High-accuracy fixed voltage regulation
Integrated thermal shutdown protection

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Automotive electronic systems requiring stable 1.5 V power rails
Battery-powered vehicle modules operating within 4.5 V to 14 V input ranges
Embedded control units in harsh temperature environments

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify the specific suffix ME2 against the official datasheet to confirm package type and tape/reel specifications. Confirm AEC-Q100 compliance requirements match your system design. Check for end-of-life status or alternative recommendations if this component is designated as non-recommended for new designs.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this regulator when a precise 1.5 V output is required for automotive applications. Ensure the load current does not exceed 300 mA. Verify that the input voltage remains between 4.5 V and 14 V. Consider the HTSOP-J8 package constraints for PCB layout and thermal management in enclosed spaces.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This component belongs to ROHM's automotive-grade LDO series, designed for high accuracy and reliability in vehicle electronics. It complements other variants in the BDxxGA3VEFJ family, which offer different fixed output voltages while maintaining similar performance characteristics and packaging options for standardized design integration.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Replacement Considerations

Consult the official ROHM datasheet for direct pin-compatible substitutes within the same automotive LDO family. Verify equivalent electrical parameters such as output voltage, current rating, and dropout voltage before substitution.

How to buy

Online and offline orders are supported. If the item is available for online purchase, you can place it in the cart; for wholesale pricing, please contact our product manager for a quote.

Payment Method

Payment methods: T/T, WeChat Pay, credit cards, Google Pay, Apple Pay . Buyer covers shipping, fees, duties, and taxes; contact our product manager if you need a contract/procurement process.

Delivery time

In-stock items usually ship within 24 hours. Otherwise, shipment is arranged 1 to 2 days after the items arrive at our warehouse. Timing depends on destination and shipping method.

Freight calculation

Freight cost depends on destination, package size, and weight . We offer shipping options via DHL, FedEx, UPS, and TNT , and can ship using your freight account upon request.

Mode of Transportation

We ship via DHL, FedEx, UPS, and TNT. If you prefer a specific logistics provider, we can ship using your designated carrier.

Return and Refund

Returns are accepted within 60 days of invoice with RMA approval. Items must be resalable; original invoice and test report are required. No returns for customer errors.