BU7265G-TR

$1.78

Description：IC OPAMP GP 1 CIRCUIT 5SSOP
Series：-
Mfr：Rohm Semiconductor
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:7ab51af3bc67 Category: Instrumentation, Op Amps, Buffer Amps Brand: Rohm Semiconductor

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

BU7265G-TR is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC OPAMP GP 1 CIRCUIT 5SSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for BU7265G-TR

Description：IC OPAMP GP 1 CIRCUIT 5SSOP
Series：-
Mfr：Rohm Semiconductor
Package：Tape & Reel (TR),Cut Tape (CT)
Amplifier Type：General Purpose
Number of Circuits：1
Output Type：Rail-to-Rail
Slew Rate：0.0024V/µs
Gain Bandwidth Product：4 kHz
Current - Input Bias：1 pA
Voltage - Input Offset：1 mV
Current - Supply：350nA
Current - Output / Channel：4 mA
Voltage - Supply Span (Min)：1.8 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：SC-74A, SOT-753
Supplier Device Package：5-SSOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for BU7265G-TR

BU7265G-TR

Instrumentation, Op Amps, Buffer Amps Overview

The BU7265G-TR is a single-channel ultra-low power CMOS operational amplifier manufactured by ROHM Semiconductor. It operates on a single supply voltage ranging from +1.8V to +5.5V with a typical supply current of 0.35μA. The device features input and output full swing capabilities, allowing operation near the supply rails. Key electrical parameters include a unity gain bandwidth of 4kHz, a slew rate of 2.4V/ms, and an input bias current of 1pA. It is housed in a compact SSOP5 package and supports surface mount installation.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Ultra-low supply current consumption suitable for battery-powered applications
Input and output full swing operation across the operating voltage range
Low input bias current characteristics
Wide operating temperature range availability

Instrumentation, Op Amps, Buffer Amps Applications

Battery-powered equipment
Portable equipment
Consumer equipment
Sensor amplifiers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific part number suffix against official ROHM documentation to confirm packaging details and revision status. Ensure compatibility with the target application's voltage and temperature requirements before procurement. Cross-reference datasheet specifications with distributor listings to confirm authenticity and technical alignment.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for designs requiring minimal quiescent current and rail-to-rail performance at low voltages. Consider the 4kHz bandwidth limitation when determining suitability for signal processing tasks. Evaluate thermal dissipation constraints based on the SSOP5 package size and ambient operating conditions.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the BU7265 series of ultra-low power CMOS operational amplifiers. The 'G' designation indicates the SSOP5 package type, while '-TR' specifies the tape and reel packaging format. This series is designed for general-purpose applications where power efficiency and low voltage operation are critical design factors.