CLC1010IST5

Instrumentation, Op Amps, Buffer Amps Overview

The CLC1010IST5 is a single-channel, low-cost voltage feedback amplifier from the Comlinear family. It operates on a supply range of 2.5V to 5.5V with a typical supply current of 70μA per channel. The device features a 7.3MHz unity gain bandwidth and a 9V/μs slew rate. Input voltage ranges extend from -0.3V to 3.8V at 5V supplies, while the output swings rail-to-rail (0.04V to 4.96V). It includes short circuit protection and overdrive recovery in less than 60ns.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Ultra-low power consumption of 70μA per channel for battery-powered applications
• Rail-to-rail input and output stages with extended common-mode range
• Unity-gain stable voltage feedback topology with high slew rate performance
• Integrated short-circuit protection and soft saturation recovery

Instrumentation, Op Amps, Buffer Amps Applications

• ADC buffer circuits
• Active filters
• Portable test instruments
• Medical equipment signal conditioning
• Mobile communications systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify component authenticity as the CLC1010 series is officially listed as Obsolete (OBS) by Exar Corporation. Confirm package type matches SOT23-5 or SOIC-8 requirements. Ensure design accounts for end-of-life status when planning long-term production runs.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this part for designs requiring minimal quiescent current alongside moderate bandwidth. Verify that the 70μA supply current meets system power budgets. Check that the 7.3MHz bandwidth satisfies signal frequency requirements without excessive phase lag.

Instrumentation, Op Amps, Buffer Amps Part Context

The CLC1010 is the single-channel variant within the Comlinear CLC1010/CLC2010 family. It utilizes a complementary bipolar process to deliver high performance at low cost. The device is designed to compete with low-power CMOS amplifiers while maintaining superior dynamic characteristics.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

No specific substitute part numbers are documented in the official datasheet. Designers should evaluate other ultra-low power operational amplifiers with similar bandwidth and supply voltage specifications.