DG201ACJ+

$10.90

Description：IC SWITCH SPST-NCX4 200OHM 16DIP
Series：-

SKU:25c73c0576e9 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG201ACJ+ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NCX4 200OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG201ACJ+

Description：IC SWITCH SPST-NCX4 200OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：200Ohm
Channel-to-Channel Matching (ΔRon)：-
Voltage - Supply, Single (V+)：-
Voltage - Supply, Dual (V±)：±4.5V ~ 18V
Switch Time (Ton, Toff) (Max)：600ns, 450ns
-3db Bandwidth：-
Charge Injection：20pC
Channel Capacitance (CS(off), CD(off))：5pF, 5pF
Current - Leakage (IS(off)) (Max)：5nA
Crosstalk：-90dB @ 100kHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG201ACJ+

DG201ACJ+

Analog Switches, Multiplexers, Demultiplexers Overview

The DG201ACJ+ is a quad single-pole single-throw (SPST) normally closed analog switch manufactured by Analog Devices Inc./Maxim Integrated. It operates on dual power supplies ranging from ±4.5V to ±18V and utilizes monolithic low-power CMOS technology. The device features guaranteed break-before-make switching, with maximum turn-on time of 600ns and maximum turn-off time of 450ns. It offers an on-resistance of up to 200Ω at ±15V supply and supports continuous drain-source current of 20mA. The component is housed in a 16-pin Plastic DIP package and functions within a temperature range of 0°C to +70°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Normally closed operation without requiring a separate VL supply
Nonlatching behavior when power supplies are disconnected while input signals remain connected
CMOS and TTL logic compatible control interface

Analog Switches, Multiplexers, Demultiplexers Applications

Winchester Disk Drives
Test Equipment
Communications Systems
PBX, PABX
Guidance and Control Systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix against official documentation to confirm the exact package type and operating temperature range. Confirm RoHS compliance status through manufacturer declarations. Ensure the selected variant matches the required voltage and thermal specifications for the intended application environment before finalizing procurement.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component for applications requiring normally closed signal paths and robust fault protection against latch-up during power loss. Consider the ±4.5V to ±18V supply range and the specific switching speed requirements of 600ns turn-on and 450ns turn-off. Evaluate the 16-pin PDIP footprint availability against board layout constraints and thermal dissipation needs.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the DG201A/DG211 family of quad SPST CMOS analog switches. The DG201A variant specifically provides faster switching speeds compared to the DG211. Both devices share similar electrical characteristics but differ primarily in their dynamic performance metrics, making the DG201A suitable for higher-speed signal routing applications.