DG407CJ

$3.87

Description：IC MUX DUAL 8:1 100OHM 28DIP
Series：-

SKU:3e7e1c614333 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG407CJ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC MUX DUAL 8:1 100OHM 28DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG407CJ

Description：IC MUX DUAL 8:1 100OHM 28DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：-
Multiplexer/Demultiplexer Circuit：8:01
On-State Resistance (Max)：100Ohm
Channel-to-Channel Matching (ΔRon)：1.5Ohm
Voltage - Supply, Single (V+)：5V ~ 30V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：200ns, 150ns
-3db Bandwidth：-
Charge Injection：2pC
Channel Capacitance (CS(off), CD(off))：8pF, 65pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-92dB @ 100kHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：28-DIP (0.600", 15.24mm)
Supplier Device Package：28-PDIP
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG407CJ

DG407CJ

Analog Switches, Multiplexers, Demultiplexers Overview

The DG407CJ+ is a dual 8-channel CMOS analog multiplexer in a 28-pin Plastic DIP package. It operates with single supplies from +5V to +30V or dual supplies from ±4.5V to ±20V. Key electrical parameters include a maximum on-resistance of 100Ω, maximum on-resistance matching between channels of 8Ω, and maximum on-resistance flatness of 9Ω. The device features a maximum charge injection of 15pC and an input leakage current of less than 5nA at +85°C. Transition time is typically 300ns, with enable turn-on/off times up to 600ns/300ns. Power consumption is low at 1.25mW max.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Pin-compatible plug-in upgrade for industry standard DG406/DG407
Guaranteed low charge injection for simplified sample-and-hold applications
Low power consumption suitable for battery-operated systems
Digital input controls compatible with TTL and CMOS logic levels

Analog Switches, Multiplexers, Demultiplexers Applications

Sample-and-Hold Circuits
Data-Acquisition Systems
Test Equipment
Audio Signal Routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'CJ+' corresponds to the 28-pin Plastic DIP package and the commercial temperature range (0°C to +70°C). Confirm RoHS compliance status as indicated by the '+' designation. Ensure the ordering part number matches the required channel configuration and pinout for the target PCB footprint.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a dual 8-channel multiplexer is required instead of a single 16-channel unit. Verify that the 100Ω on-resistance meets the signal integrity requirements of the application. Consider the ±4.5V to ±20V dual supply range if bipolar signals are present. Check thermal dissipation limits for the DIP-28 package under continuous operation.

Analog Switches, Multiplexers, Demultiplexers Part Context

The DG407 is part of the DG406/DG407 series of improved CMOS analog multiplexers designed as drop-in replacements for older DG506A/DG507A devices. The DG407 specifically provides two independent 8-channel multiplexing paths within a single 28-pin package, offering enhanced performance metrics such as lower on-resistance and reduced charge injection compared to legacy counterparts.