SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
The Hoffman E8PBA is a NEMA 12/13 rated pushbutton enclosure constructed from 14-gauge steel with a polyester powder-coated ANSI 61 gray finish. It features a sloped front design accommodating eight holes for 30.5 mm or 22.5 mm operators. The unit measures 7.25 inches in height, 10.75 inches in width, and 6.75 inches in depth (184.15 mm x 273.05 mm x 171.45 mm). It provides IP65 protection and complies with UL 508A standards.
Verify that the specific application requires the NEMA 12/13 rating and IP65 sealing capability. Confirm compatibility with existing 30.5 mm or 22.5 mm operator dimensions before ordering. Ensure the 14-gauge steel construction meets mechanical strength requirements for the intended mounting location. Check for any site-specific UL 508A compliance documentation needs.
Select this model when an enclosed control station housing is required without pre-installed operators. Choose based on the need for a sloped front to improve ergonomics or visibility of indicators. Consider the 14-gauge steel thickness for durability in industrial settings. Verify that no conduit entrance holes are needed, as this model does not include them.
This component belongs to the Hoffman E series of pushbutton enclosures. These units are designed specifically for holding pushbuttons and switches where ground smoothness is critical. The series offers various hole configurations and depths to suit different control panel layouts and operator sizes.
No public confirmed substitute part numbers are available.

In embedded design, the tug-of-war between cost and performance is constant. On one side, you have Microcontrollers (MCUs)—cheap, simple, and efficient. On the other,…
Read More
In the world of electronics, memory components play a critical role in system performance—and DRAM (Dynamic Random-Access Memory) is one of the most widely…
Read More
Every audio power amplifier design starts with the same fundamental challenge: converting a low-voltage line-level signal into the high-current drive required by a reactive…
Read MoreON Semiconductor (onsemi), a global leader in intelligent power and sensing technologies, has announced plans to implement price adjustments for select product lines, effective…
Read More
Select a bridge rectifier by reverse voltage, capacitor charging current, startup surge and cooling. Work through a stated DC voltage and ripple example.
Read MoreRecently, global semiconductor manufacturers have been constantly taking actions and presenting numerous new developments in aspects such as process technology and product research and…
Read More
An RF IC, or radio-frequency integrated circuit, is a chip that processes wireless signals between the antenna and the baseband processor. Instead of building…
Read More
WILMINGTON, Mass. – July 3, 2026 – Analog Devices, Inc. (ADI), the global leading supplier of high-performance analog, mixed-signal and signal processing semiconductors, has…
Read More
Understand how oscillators generate timing signals, how they differ from crystals, and which frequency, output and stability specs matter when choosing one.
Read More
Learn why PTC resistance rises with temperature, how it differs from NTC, and which ratings matter for sensing and protection.
Read More
Choose logic inverter ICs by thresholds, supply, output drive and delay. Compare standard and Schmitt-trigger inputs, power sequencing and replacement checks.
Read More
Recently, the global electronic component market has witnessed complex and changeable trends. In the memory chip sector, the wave of price increases continues to…
Read More