EL5293CSZ

Description：IC OPAMP CFA 2 CIRCUIT 8SOIC
Series：EL5293
Mfr：Renesas Electronics Corporation
Package：Tube

SKU:bb57590f9763 Category: Instrumentation, Op Amps, Buffer Amps Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

EL5293CSZ is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC OPAMP CFA 2 CIRCUIT 8SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for EL5293CSZ

Description：IC OPAMP CFA 2 CIRCUIT 8SOIC
Series：EL5293
Mfr：Renesas Electronics Corporation
Package：Tube
Amplifier Type：Current Feedback
Number of Circuits：2
Output Type：-
Slew Rate：2200V/µs
Gain Bandwidth Product：-
Current - Input Bias：1 µA
Voltage - Input Offset：1 mV
Current - Supply：4mA (x2 Channels)
Current - Output / Channel：120 mA
Voltage - Supply Span (Min)：5 V
Voltage - Supply Span (Max)：10 V
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：300 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for EL5293CSZ

EL5293CSZ

Instrumentation, Op Amps, Buffer Amps Overview

The EL5293CSZ is a dual current feedback amplifier with a 300MHz -3dB bandwidth and 4mA supply current per amplifier. It operates from single or dual supplies ranging from 5V to 10V, featuring a slew rate of 1900V/µs typical at AV=+2. The device offers a channel separation of 60dB at 5MHz and input voltage noise of 4.4nV/√Hz. It is housed in an 8-lead SOIC package and supports an industrial temperature range of -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

High-speed current feedback topology providing consistent bandwidth across varying closed-loop gains
Low power consumption suitable for battery-powered and portable equipment
Rail-to-rail output swing capability extending within 1V of either supply rail
Optimized video performance with low differential gain and phase error specifications

Instrumentation, Op Amps, Buffer Amps Applications

Video amplifiers
Cable drivers
RGB amplifiers
Test equipment
Current to voltage converters

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific manufacturer origin as Intersil products are now part of Renesas Electronics Corporation. Confirm that the component meets RoHS compliance standards through Pb-free plus anneal material sets. Ensure the ordering suffix matches the required 8-lead SOIC package configuration for your design constraints.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for applications requiring high bandwidth with low power dissipation. Consider the EL5293A variant if hardware enable/disable functionality is necessary to reduce standby current. Evaluate thermal management requirements when driving low impedance loads below 25Ω to prevent exceeding maximum junction temperatures.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the EL529x family of high-speed current feedback amplifiers. It shares architectural similarities with the EL5191 and EL5192 series but offers distinct bandwidth and power characteristics tailored for general-purpose high-frequency signal processing tasks.