EL8102IS

Instrumentation, Op Amps, Buffer Amps Overview

The EL8102IS is a single-channel, voltage feedback operational amplifier manufactured by Intersil (Renesas). It features a -3dB bandwidth of 500MHz and a slew rate of 600V/µs. The device operates on supply voltages ranging from 3V to 5.0V with a low supply current of 5.6mA. It provides rail-to-rail output capability and allows input signals to extend to 0.15V below the negative supply rail. The component includes a fast-acting disable circuit with a 25ns disable time and 200ns enable time. It is housed in an 8-lead SOIC package and specified for operation between -40°C and +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• High-speed performance with 500MHz bandwidth and 600V/µs slew rate
• Rail-to-rail output swing capability
• Integrated fast-acting disable and power-down circuit
• Low supply current consumption

Instrumentation, Op Amps, Buffer Amps Applications

• Video amplifiers
• Multiplexing applications
• Portable and hand-held products
• Communication systems
• Instrumentation and industrial equipment

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the manufacturer status as Intersil or Renesas Electronics, noting that Intersil was acquired by Renesas. Confirm the specific suffix 'IS' corresponds to the 8-lead SOIC package variant. Check RoHS compliance status as Pb-Free options are available within the series. Ensure the disable functionality is required, as this feature distinguishes the EL8102 from other variants like the EL8100.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select the EL8102IS when high-speed signal processing is required alongside low power consumption. The integrated disable pin makes it suitable for multiplexed systems where power saving during idle states is critical. Compare against the EL8100 if disable functionality is not needed, or the EL8103 if a different package configuration is preferred. Ensure the 500MHz bandwidth meets the system's frequency requirements.

Instrumentation, Op Amps, Buffer Amps Part Context

The EL8102 belongs to the EL810x family of rail-to-rail amplifiers designed for general-purpose video and communication applications. It shares core specifications with the EL8103 but adds a disable feature. The 'IS' designation indicates the commercial temperature range and SOIC packaging. This component bridges the gap between high-speed performance and low power efficiency in portable electronics.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

The EL8102IS-T7 and EL8102IS-T13 are tape-and-reel versions of the same component. The EL8102IW variants offer the same electrical characteristics in a SOT-23 package. Verify pin compatibility before substituting with package variations.