F66T148GVP

Overview

The F66T148GVP is a straight section wireway manufactured by Hoffman Enclosures, Inc. It features a lay-in flat cover design and is constructed from 14/16 gauge steel with an ANSI 61 gray polyester powder paint finish. The unit measures 6 inches in width, 6 inches in height, and 48 inches in length. It is rated as NEMA Type 1 and complies with UL 870 standards for protection against falling dirt.

Feature Summary

• Lay-in flat cover design allows for easy access to internal wiring without removing the entire cover.
• Constructed from durable steel with a corrosion-resistant gray polyester powder paint finish.
• Open-sided section design facilitates straightforward installation of wires and cables.

Applications

• Enclosing wire and cable in standard wireway runs
• Protecting electrical wiring in environments where dust, dirt, oil, and water are not serious concerns
• Industrial control panel wiring management

Procurement Notes

Verify that the required NEMA Type 1 rating aligns with environmental conditions, as this model does not provide protection against water or significant ingress. Confirm that the 48-inch length fits the specific run requirements. Ensure compatibility with other Hoffman wireway fittings and sections for seamless system integration.

Selection Notes

Select this model when only basic protection against falling dirt is required. It is suitable for indoor dry locations. For environments requiring protection against windblown dust, rain, or sleet, consider upgrading to higher NEMA ratings such as Type 3R, 4, or 4X. Verify that the 14/16 gauge steel thickness meets structural load requirements.

Part Context

This component belongs to the Hoffman Lay-in Flat-Cover Type 1 Straight Sections series. These units are designed to be interconnected to form continuous wireway paths. They are typically used in conjunction with various fittings, elbows, and tees to route cabling efficiently within industrial and commercial electrical systems.

Replacement Considerations

Direct replacements must match the 6x6x48 dimensions and Type 1 rating. Compatible alternatives include other manufacturers' NEMA Type 1 wireways with similar lay-in cover mechanisms. Ensure the replacement maintains the same gauge steel construction and UL 870 listing for code compliance.