HA1630S02CMEL-E

Instrumentation, Op Amps, Buffer Amps Overview

The HA1630S02CMEL-E is a single-channel, general-purpose operational amplifier manufactured by Renesas Electronics Corporation. It operates within a supply voltage range of 1.8 V to 5.5 V and consumes a typical supply current of 15 µA per channel. The device features a gain-bandwidth product of 200 kHz and a slew rate of 0.125 V/µs. Input offset voltage is specified at a maximum of 4 mV, with an input bias current of 1 pA. The output can source or sink up to 800 µA. It is housed in a 5-MPAK (SC-74A/SOT-753) surface-mount package and supports an operating temperature range from -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Ultra-low power consumption suitable for battery-operated applications
• High input impedance with minimal bias current
• Wide single-supply voltage operation capability
• Compact surface-mount packaging for space-constrained designs

Instrumentation, Op Amps, Buffer Amps Applications

• Portable instrumentation circuits
• Signal conditioning for sensor interfaces
• Buffer amplification in low-power systems
• Battery-powered measurement devices

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix CMEL-E against official Renesas documentation to confirm package type and tape-and-reel specifications. Confirm end-of-life status and availability through authorized distributors, as this component may be discontinued. Ensure moisture sensitivity level handling requirements are met during assembly.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when low quiescent current is critical alongside moderate bandwidth requirements. Compare input offset voltage and bias current specifications against application tolerance levels. Verify that the 800 µA output drive capability meets load requirements without external buffering.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the HA1630S series of operational amplifiers designed for low-voltage, low-power applications. The series offers various configurations including buffer and comparator variants. The HA1630S02CMEL-E specifically denotes the op-amp variant in the SC-74A package.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Check for direct pin-compatible replacements within the HA1630S family. Evaluate alternative ultra-low-power op-amps from other manufacturers if sourcing is limited, ensuring electrical parameters match closely.