HI3-5048-5

$5.13

Description：IC SWITCH SPST X 2 45OHM 16DIP
Series：-

SKU:e4210bdf297f Category: Analog Switches, Multiplexers, Demultiplexers Brand: Harris Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HI3-5048-5 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Harris Corporation. Its product description is IC SWITCH SPST X 2 45OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for HI3-5048-5

Description：IC SWITCH SPST X 2 45OHM 16DIP
Series：-
Mfr：Harris Corporation
Package：Bulk
Switch Circuit：SPST
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：45Ohm
Channel-to-Channel Matching (ΔRon)：1Ohm
Voltage - Supply, Single (V+)：15V
Voltage - Supply, Dual (V±)：±15V
Switch Time (Ton, Toff) (Max)：500ns, 500ns
-3db Bandwidth：-
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：11pF, 11pF
Current - Leakage (IS(off)) (Max)：2nA
Crosstalk：-88dB @ 100kHz
Operating Temperature：0°C ~ 75°C
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：2
Grade：-
Qualification：-

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for HI3-5048-5

HI3-5048-5

Analog Switches, Multiplexers, Demultiplexers Overview

The HI3-5048-5 is a dual single-pole single-throw (SPST) analog switch manufactured by Harris. It operates with a nominal negative supply voltage of -15 V and features a maximum on-resistance of 45 Ω with a matching specification of 1 Ω. The device provides an off-isolation of 80 dB and supports signal currents up to 80 mA. It utilizes a 16-pin PDIP package, operates at temperatures up to 75 °C, and offers break-before-make switching with TTL and CMOS compatibility.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Dielectric isolation processing ensures latch-free operation with low leakage current
Break-before-make switching action prevents signal shorting during transitions
TTL and CMOS logic compatible for versatile interface integration

Analog Switches, Multiplexers, Demultiplexers Applications

Signal routing in data acquisition systems
Multiplexing applications requiring low distortion
Instrumentation circuits needing high isolation

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the manufacturer origin as Harris Corporation, noting that subsequent corporate acquisitions may affect documentation availability. Confirm the specific suffix indicates the standard plastic DIP variant. Check RoHS compliance status, as older Harris parts often lack modern environmental certifications. Ensure the package matches the 16-pin DIP specification before ordering.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when dual SPST switching is required within a single package. The 45 Ω on-resistance suits moderate impedance loads. Verify that the -15 V supply requirement aligns with the system design. Consider the 75 °C operating limit for thermal management. Compare against the HI-5048 series for potential pin-compatible alternatives if sourcing constraints exist.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the HI-5040 through HI-5051 family of analog switches. These devices share common characteristics such as dielectric isolation and low on-resistance stability. The HI3 prefix typically denotes a specific manufacturing or qualification variant within the broader Harris analog switch portfolio.