MAX339CPE

Description：IC SWITCH SP4T X 2 400OHM 16DIP
Series：-

SKU:1c7788d1fc1d Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX339CPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SP4T X 2 400OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX339CPE

Description：IC SWITCH SP4T X 2 400OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SP4T
Multiplexer/Demultiplexer Circuit：4:01
On-State Resistance (Max)：400Ohm
Channel-to-Channel Matching (ΔRon)：4Ohm
Voltage - Supply, Single (V+)：4.5V ~ 30V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：500ns, 500ns
-3db Bandwidth：-
Charge Injection：1.5pC
Channel Capacitance (CS(off), CD(off))：3pF, 6pF
Current - Leakage (IS(off)) (Max)：20pA
Crosstalk：-92dB @ 100kHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX339CPE

MAX339CPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX339CPE+ is a dual, 4-channel CMOS analog multiplexer housed in a 16-pin Plastic DIP package. It connects one of four inputs to a common output using a 2-bit binary address. The device operates from single supplies of +4.5V to +30V or dual supplies of ±4.5V to ±20V. Key electrical parameters include a maximum on-resistance of 400 Ω, typical charge injection of 1.5pC, and off-leakage current less than 20nA at +25°C. Control inputs are TTL compatible, and the component provides electrostatic discharge protection exceeding 2000V.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Features extremely low off-leakage currents and guaranteed low charge injection for signal integrity.
Includes built-in electrostatic discharge protection greater than 2000V per method 3015.7.
Offers pin-compatible upgrades for industry-standard DG508A and DG509A devices.

Analog Switches, Multiplexers, Demultiplexers Applications

Data-acquisition systems
Sample-and-hold circuits
Test equipment

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'CPE+' against official documentation to confirm the plastic DIP package and commercial temperature range specifications. Ensure that ordering details match the manufacturer's current part numbering system, as suffixes define critical physical and environmental attributes.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a dual 4:1 multiplexer configuration with low leakage is required. Verify that the application voltage falls within the specified single or dual supply ranges. Confirm that the 400 Ω on-resistance meets the circuit requirements compared to alternatives with lower resistance but higher leakage.

Analog Switches, Multiplexers, Demultiplexers Part Context

This device belongs to the MAX338/MAX339 family of monolithic CMOS analog multiplexers. The MAX339 specifically provides two independent 4-to-1 channels, whereas the MAX338 offers an 8-channel configuration. Both share similar fabrication processes and electrical characteristics.