MAX4521CEE

$0.93

Description：IC SW SPST-NCX4 100OHM 16QSOP
Series：-

SKU:bfbce0fe97f4 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4521CEE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SW SPST-NCX4 100OHM 16QSOP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4521CEE

Description：IC SW SPST-NCX4 100OHM 16QSOP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：100Ohm
Channel-to-Channel Matching (ΔRon)：1Ohm
Voltage - Supply, Single (V+)：2V ~ 12V
Voltage - Supply, Dual (V±)：±2V ~ 6V
Switch Time (Ton, Toff) (Max)：80ns, 30ns
-3db Bandwidth：-
Charge Injection：1pC
Channel Capacitance (CS(off), CD(off))：2pF, 2pF
Current - Leakage (IS(off)) (Max)：1nA
Crosstalk：-90dB @ 100kHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Surface Mount
Package / Case：16-SSOP (0.154", 3.90mm Width)
Supplier Device Package：16-QSOP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4521CEE

MAX4521CEE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4521CEE is a quad, low-voltage, single-pole/single-throw (SPST) analog switch manufactured by Analog Devices Inc./Maxim Integrated. It features four normally closed switches housed in a 16-pin QSOP package with an operating temperature range of 0°C to +70°C. The device supports dual supplies from ±2V to ±6V or a single supply between +2V and +12V. Key electrical parameters include a maximum on-resistance of 100Ω, channel-to-channel matching of 1Ω, and off-leakage current of 1nA at +25°C. Turn-on time is typically 80ns and turn-off time is 30ns under standard conditions.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Four integrated SPST switches configured as normally closed
Rail-to-rail analog signal handling capability
TTL/CMOS-compatible digital logic inputs
Low power consumption with high ESD protection

Analog Switches, Multiplexers, Demultiplexers Applications

Battery-operated equipment
Data acquisition systems
Test equipment
Avionics
Audio signal routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify component authenticity through authorized distributors or the manufacturer directly. Confirm the specific ordering suffix matches the required package and temperature grade. Check for RoHS compliance status as indicated in official documentation. Ensure storage and handling procedures meet moisture sensitivity level requirements to prevent damage prior to assembly.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this part when a quad SPST configuration with normally closed contacts is required. Verify that the supply voltage range aligns with system constraints. Consider the on-resistance flatness and leakage specifications for signal integrity requirements. Evaluate thermal dissipation capabilities based on the QSOP package limitations and ambient operating conditions.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX4521/MAX4522/MAX4523 family of quad analog switches. The MAX4521 variant specifically provides four normally closed switches, distinguishing it from the MAX4522 (normally open) and MAX4523 (mixed NC/NO). The CEE suffix denotes the commercial temperature range and QSOP package type within this product line.