MAX4603CPE

$3.26

Description：IC SW SPST-NO/NCX4 2.5OHM 16DIP
Series：-

SKU:db99267f4b34 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4603CPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SW SPST-NO/NCX4 2.5OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4603CPE

Description：IC SW SPST-NO/NCX4 2.5OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Switch Circuit：SPST - NO/NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：2.5Ohm
Channel-to-Channel Matching (ΔRon)：100mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：250ns, 350ns
-3db Bandwidth：-
Charge Injection：120pC
Channel Capacitance (CS(off), CD(off))：55pF, 55pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-59dB @ 1MHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4603CPE

MAX4603CPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4603CPE is a quad SPST CMOS analog switch in a 16-pin Plastic DIP package, featuring two normally open and two normally closed switches. It operates from single supplies of +4.5V to +36V or dual supplies of ±4.5V to ±20V. The device guarantees a maximum on-resistance of 2.5Ω with a match between channels of 0.5Ω max and flatness of 0.5Ω max over the signal range. Off-leakage current is limited to 2.5nA at +85°C. Digital inputs have +0.8V and +2.4V logic thresholds for TTL/CMOS compatibility. Operating temperature range is 0°C to +70°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Rail-to-rail signal handling capability
TTL/CMOS-compatible control inputs
Guaranteed on-resistance matching and flatness

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement
Test equipment
Communication systems
PBX/PABX systems
Audio-signal routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'CPE' corresponds to the 0°C to +70°C temperature range and 16-pin Plastic DIP package configuration. Confirm that the ordering information matches the exact part number required for the intended application environment and mechanical constraints.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a mix of normally open and normally closed switches is required within a single package. Ensure the supply voltage range accommodates the system's single or dual power rails. Verify that the 2.5Ω on-resistance meets the signal integrity requirements for the specific load conditions.

Analog Switches, Multiplexers, Demultiplexers Part Context

This device belongs to the MAX4601/MAX4602/MAX4603 family of low on-resistance analog switches. While the MAX4601 offers four normally closed switches and the MAX4602 provides four normally open switches, the MAX4603 combines two of each type. All variants share identical electrical characteristics regarding resistance, leakage, and speed.