MCP6N11T-002E/MNY

Instrumentation, Op Amps, Buffer Amps Overview

The MCP6N11T-002E/MNY is a single-channel instrumentation amplifier from the MCP6N11 series, manufactured by Microchip Technology. It features rail-to-rail input and output capabilities, optimized for single-supply operation with a voltage range of 1.8V to 5.5V. The device includes an Enable/VOS Calibration pin (EN/CAL) for offset trimming. Key electrical specifications include a typical bandwidth of 500 kHz at minimum gain, a supply current of 800 μA per channel, and a maximum operating temperature range of -40°C to +125°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Features rail-to-rail input and output performance suitable for single-supply applications
• Includes an Enable/VOS Calibration pin for input offset voltage adjustment
• Gain is set by two external resistors to minimize gain error and drift over temperature

Instrumentation, Op Amps, Buffer Amps Applications

• High side current sensing
• Wheatstone bridge sensor interfaces
• Difference amplifiers with level shifting
• Power control loops

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify that the ordering suffix 'MNY' corresponds to the TDFN-8 package as specified in the datasheet packaging information section. Confirm the '-002' designation indicates the GMIN = 2 V/V configuration. Ensure the component meets the required extended temperature range specifications for your application environment before finalizing procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this part when low power consumption and high DC precision are required in portable or battery-operated systems. The GMIN = 2 option offers a balance between noise performance and bandwidth. Consider the EN/CAL pin functionality if system-level offset calibration is necessary to maintain accuracy across varying temperatures.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the MCP6N11 family of low-power instrumentation amplifiers. The family provides multiple minimum gain options (1, 2, 5, 10, and 100 V/V) to optimize input offset voltage and noise for specific applications. All variants share the same core architecture, featuring rail-to-rail I/O and a single-channel design powered by a 1.8V to 5.5V supply.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Direct substitutes within the same family include MCP6N11-001E/MNY (GMIN=1), MCP6N11-005E/MNY (GMIN=5), MCP6N11-010E/MNY (GMIN=10), and MCP6N11-100E/MNY (GMIN=100). These parts share identical pinouts and electrical characteristics except for their internal minimum gain settings.