MCT2202300

$0.20

Description：OPTOISO 5.3KV TRANS W/BASE 6-DIP
Series：-
Mfr：onsemi
Package：Tube

SKU:782ca51490fa Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MCT2202300 is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 5.3KV TRANS W/BASE 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MCT2202300

Description：OPTOISO 5.3KV TRANS W/BASE 6-DIP
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：63% @ 10mA
Current Transfer Ratio (Max)：125% @ 10mA
Turn On / Turn Off Time (Typ)：2µs, 2µs
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：30V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.25V
Current - DC Forward (If) (Max)：100 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.300", 7.62mm)
Supplier Device Package：6-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MCT2202300

MCT2202300

Transistor, Photovoltaic Output Optoisolators Overview

The onsemi MCT2202300 is a single-channel transistor output optocoupler housed in a 6-DIP package. It features an NPN phototransistor with a base terminal for enhanced switching performance. The device provides a high isolation voltage of 5300Vrms and supports a collector-emitter saturation voltage of up to 400mV. It operates within a temperature range of -55°C to 100°C, with a maximum forward current of 100mA and a typical forward voltage of 1.25V.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Integrated base terminal on the NPN phototransistor output stage
High insulation voltage rating of 5300Vrms for robust signal isolation
Fast switching characteristics with typical turn-on and turn-off times of 2µs

Transistor, Photovoltaic Output Optoisolators Applications

General-purpose digital signal isolation
Microprocessor system interface circuits
Solid-state relay driver applications

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify component authenticity through authorized distributors as this part may be obsolete. Confirm RoHS compliance status and check for valid replacement parts like CNY172TVM if manufacturing availability is restricted. Ensure the 6-DIP package matches your PCB footprint requirements before finalizing procurement decisions.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a base-driven phototransistor is required for faster switching speeds compared to standard variants. Consider the 5300Vrms isolation rating for safety-critical interfaces. Evaluate the 6-DIP package constraints against available board space and verify that the 30V collector-emitter voltage meets circuit load requirements.

Transistor, Photovoltaic Output Optoisolators Part Context

This device belongs to the MCT2 family of optocouplers from onsemi. It shares architectural similarities with other models in the series but is distinguished by its specific output configuration and isolation ratings. The MCT2 series is widely recognized for reliability in industrial communication and power supply feedback loops.