MXL1535EEWI+T

$18.96

Description：IC TRANSCEIVER FULL 1/1 28SOIC
Mfr：Analog Devices Inc./Maxim Integrated

SKU:c71a81d60693 Category: Drivers, Receivers, Transceivers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MXL1535EEWI+T is listed in the Drivers, Receivers, Transceivers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC TRANSCEIVER FULL 1/1 28SOIC. Review the specifications below when checking this part for your BOM.

Drivers, Receivers, Transceivers specifications for MXL1535EEWI+T

Description：IC TRANSCEIVER FULL 1/1 28SOIC
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tape & Reel (TR),Cut Tape (CT)
Series：-
Type：Transceiver
Protocol：RS422, RS485
Number of Drivers/Receivers：1月1日
Duplex：Full
Data Rate：1Mbps
Voltage - Supply：3V ~ 5.5V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：28-SOIC (0.295", 7.50mm Width), 16 Leads
Supplier Device Package：28-SOIC
Receiver Hysteresis：30 mV
Grade：-
Qualification：-

Drivers, Receivers, Transceivers datasheet and documents for MXL1535EEWI+T

MXL1535EEWI+T

Drivers, Receivers, Transceivers Overview

The MXL1535EEWI+T is an isolated RS-485/RS-422 full-duplex transceiver providing 2500VRMS galvanic isolation between the logic side and the bus side. It supports data rates up to 1000kbps with a +4.5V to +5.5V supply range on both sides. The device integrates one differential driver and one receiver, featuring ±15kV ESD protection and fail-safe inputs. Isolation is achieved via integrated high-voltage capacitors for data and an external transformer for power transfer driven by a 420kHz internal oscillator.

Drivers, Receivers, Transceivers Feature Summary

Provides 2500VRMS galvanic isolation using integrated high-voltage capacitors
Supports full-duplex communication at speeds up to 1000kbps
Includes pin-selectable slew-rate limiting to minimize electromagnetic interference
Features hot-swap protection and isolation-barrier fault detection

Drivers, Receivers, Transceivers Applications

Isolated RS-485 systems
Systems with large common-mode voltage differences
Industrial-control local area networks
Telecommunications systems

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific ordering suffix EEWI corresponds to the -40°C to +85°C extended temperature range and Wide SO package. Confirm that the component requires an external isolation transformer for power transfer across the barrier, as this affects the bill of materials and layout requirements.

Drivers, Receivers, Transceivers Selection Notes

Select the MXL1535E variant over the MAX3535E when the application requires a minimum logic-side supply voltage of +4.5V. Ensure the design accommodates the necessary external transformer for power delivery to the isolated side. Verify that the 1/8 unit load receiver capability meets the node count requirements of the target network topology.

Drivers, Receivers, Transceivers Part Context

The MXL1535E series serves as a functionally and pin-compatible improvement of the LTC1535. It maintains compatibility within the broader MAX3535E family while offering optimized performance characteristics for higher minimum supply voltages. This lineage ensures design continuity for engineers migrating from legacy components to modern isolated interface solutions.