PLS-65F25AL01-02

Speakers Overview

The Peerless by Tymphany PLS-65F25AL01-02 is a 2.5-inch full-range driver with a 2-ohm nominal impedance and 15-watt power handling capacity. It features an aluminum cone, top port location, and square frame design. The frequency range spans from 100 Hz to 20 kHz, with a self-resonant frequency of 118.2 Hz and a sensitivity of 81.3 dB (1W/1M). Mechanical compliance equivalent volume (Vas) is 0.02 ft³, total Q (Qts) is 0.67, and maximum linear excursion (Xmax) is 2.1 mm.

Speakers Feature Summary

• Utilizes an aluminum cone for lightweight diaphragm performance
• Features a top-mounted port for acoustic efficiency
• Designed with a square frame for compact integration

Speakers Applications

• Compact audio systems requiring full-range reproduction
• Portable speaker enclosures
• DIY audio projects utilizing 2-ohm amplifiers

Speakers Procurement Notes

Verify the specific impedance rating of 2 ohms against amplifier output requirements before integration. Confirm physical dimensions and mounting hole patterns match enclosure designs. Ensure thermal management aligns with the 15-watt rated power handling in sealed or vented configurations.

Speakers Selection Notes

Select this model when a low-impedance driver is required for high-current amplifier stages. The aluminum cone offers distinct transient response characteristics compared to paper or composite alternatives. Consider the square frame geometry if space constraints favor non-circular mounting solutions over traditional round drivers.

Speakers Part Context

This component belongs to the Peerless by Tymphany PLS series, which focuses on compact full-range drivers. The series typically includes variants with different impedances and power ratings, such as the 4-ohm PLS-65F25AL01-04. The PLS-65F25AL01-02 specifically targets applications needing lower impedance operation within a small form factor.

Speakers Replacement Considerations

Direct substitutes include other Peerless by Tymphany models like the PLS-65F25AL01-04, though impedance differences require amplifier compatibility checks. Cross-brand replacements must match the 2.5-inch diameter, 2-ohm impedance, and similar Vas and Qts values for consistent tuning.