S8065JTP

$9.51

Description：SCR 800V 65A TO218X
Series：-

SKU:24aaf2ac07d6 Category: SCRs Brand: Littelfuse Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

S8065JTP is listed in the Scrs range at ChipApex. The manufacturer field lists Littelfuse Inc.. Its product description is SCR 800V 65A TO218X. Review the specifications below when checking this part for your BOM.

Scrs specifications for S8065JTP

Description：SCR 800V 65A TO218X
Series：-
Mfr：Littelfuse Inc.
Package：Tube
Voltage - Off State：800 V
Voltage - Gate Trigger (Vgt) (Max)：2 V
Current - Gate Trigger (Igt) (Max)：50 mA
Current - Hold (Ih) (Max)：80 mA
Current - Non Rep. Surge 50, 60Hz (Itsm)：800A, 950A
SCR Type：Standard Recovery
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Through Hole
Package / Case：TO-218X-3 Isolated Tab
Supplier Device Package：TO-218X Isolated
Voltage - On State (Vtm) (Max)：1.8 V
Current - On State (It (AV)) (Max)：41 A
Current - On State (It (RMS)) (Max)：65 A
Current - Off State (Max)：20 µA

Scrs datasheet and documents for S8065JTP

S8065JTP

Scrs Overview

The Littelfuse S8065JTP is a silicon-controlled rectifier (SCR) from the Teccor Sxx65x series, designed for high-power switching applications. It features an RMS on-state current of 65 A and a rated repetitive off-state voltage of 800 V. The device supports a non-repetitive peak on-state current of 950 A and maintains a low forward voltage of 1.8 V. Gate triggering requires a maximum voltage of 2 V and current of 50 mA. Housed in an SMTO-218 through-hole package, it operates within a temperature range of -40°C to +125°C.

Scrs Feature Summary

High surge capability with 950 A non-repetitive peak on-state current rating
Sensitive gate design allowing direct interfacing with microprocessors via low trigger requirements
Robust thermal performance suitable for demanding electronic controls

Scrs Applications

Solenoid control circuits
Ground fault circuit interrupters (GFCIs)
Capacitive-discharge ignition systems

Scrs Procurement Notes

Verify the specific suffix JTP against official Littelfuse documentation to confirm pinout and electrical tolerances. Ensure the procurement channel provides valid RoHS compliance data. Cross-reference the manufacturer part number with the distributor listing to prevent substitution errors during acquisition.

Scrs Selection Notes

Select this component when an 800 V blocking voltage and 65 A continuous current are required in a TO-218 form factor. Compare gate sensitivity against alternative SCRs if driving directly from low-power logic. Verify that the 950 A surge rating exceeds the expected transient loads in the target application circuit.

Scrs Part Context

This SCR belongs to the Teccor Sxx65x family, which standardizes the 65 A RMS current rating across various voltage classes. The S8065JTP specifically addresses the 800 V segment, complementing lower voltage variants like the S4065JTP. This series is engineered for industrial and consumer power control environments requiring reliable thyristor switching.